EDIT: I just noticed that my sig link, saying 'Original' Keezer, might lead folks to believe that I think I came up with the whole idea of using a chest freezer for a keg dispenser! I DON'T!!!! I did, however, decided that 'kegerator' was not an accurate name when using a freezer, so I named it 'Keezer.' At the time, there were no references to the term anywhere on HBT, or google, for that matter. So, I think I actually did come up with the name, but CERTAINLY not the idea!!
Ok, so I am finally getting started with the 'Keezer' project! Some time ago, I saw BrewPastors gorgeous chest freezer conversion posted.
Ever since, I have been thinking about how to go about doing my own. What I finally came up with was something along the lines of this:
Looks familiar, no? Well, I
told you I liked his
This is not exactly what the finished product is going to look like - I went with a larger freezer than originally planned so that I could get the desired number of kegs in it. The proportions are slightly different, but you get the idea!
The Keezer will be on casters to allow for some portability, although it will be heavy enough that it can't can't be considered 'mobile.'
In the base, there will be a cooling fan that draws air down over the sides of the freezer to draw away heat generated by the compressor. I was not aware when I first started looking into this that todays freezers use the exterior skin to shed heat, and that placing wood directly against it would seriously shorten the life-span of the compressor. Luckily, some sage advice was given on HBT, and a cooling fan was designed in! It will be wired in with the compressor to the Ranco, so whenever the compressor kicks in, so does the cooling fan.
I plan on posting periodic updates and photos as the project progresses.