Mr_McGibblets
Active Member
Hi all,
I am selling my 9-gallon stainless steel brew kettle which is wired for 220V electric brewing. Used less than 10 times.
I have moved on to all-grain BIAB and already have a larger kettle, so this one is no longer needed.
Something like this off-the-shelf would cost hundreds more, or, you could do it yourself like I have. I spent countless hours researching & acquiring the knowledge, tools, and performing the testing and labor to create this. All you have to do is plug it in!
Craigslist ad
Asking $300 OBO as-is (or $150 without the element, mount, cord and plug)
Includes:
------------
I am selling my 9-gallon stainless steel brew kettle which is wired for 220V electric brewing. Used less than 10 times.
I have moved on to all-grain BIAB and already have a larger kettle, so this one is no longer needed.
Something like this off-the-shelf would cost hundreds more, or, you could do it yourself like I have. I spent countless hours researching & acquiring the knowledge, tools, and performing the testing and labor to create this. All you have to do is plug it in!
Craigslist ad
Asking $300 OBO as-is (or $150 without the element, mount, cord and plug)
Includes:
------------
- Bayou Classic 9-gallon (36-quart) stainless stockpot (13.5 by 15 inches, 0.8mm / 20 gauge)
- Bayou Classic Brew Thermometer (Large 3" diameter face with tempered glass, 0-220 degrees F)
- 1/2" NPT threaded 3-piece 316 stainless steel ball valve (Full port, 1000 WOG)
- 1/2" NPT stainless steel M/F coupler
- Stainless steel Washers (2)
- 3/8" Male Hose adapter (barb)
- Etched gallon markings
- 12" Bazooka stainless steel kettle screen (1/2" MPT)
- Camco #02955 (4500-watt Ripple ULWD) heating element from The Electric Brewery
- BrewPi Heating Element Mounting Kit (from The Netherlands!)
- About 2 feet of industrial grade 10/3 SOOW SO Cord Excellent resistance to flame, deformation, ozone, oils, acids and chemicals.(Gauge: 10 AWG, Rating: 600 volts, 17mm OD, Temp Rating: -40°C to +90°C)
- Locking Plug, Industrial Grade (Leviton 2621 30 Amp, 250 Volt, NEMA L6-30P, 2P, 3W)
- 1/2" Male Hose adapter
- Spare 1/2" NPT stainless steel nut
- Spare 1/2" NPT stainless steel female/female coupler
- Spare 1/2" NPT stainless steel male/male hex coupler
- Extra Silicone O-Rings (FDA, 70A Durometer, Red)
- Approx 4 ft. silicone high-temp hose for transferring wort to fermenter
- Eagle Brewing Siphon Spray Wort Aerator