ApothecaryBrewing
Well-Known Member
Hey HBT, I just wired up my STC and the unit is working but when I plug an outlet checker into the outlets, nothing lights up. It tells me it is because of an open hot but I have no electrical background and need a little help trouble shooting it.
Below is a diagram of what I did:
Due to common cold I only have one wire on that side. None of the wires on the terminals are touching so I don't think it is shorting out or anything. As I mentioned above, the checker says (NO LIGHTS) I have an open hot, but I am wondering if it could be something else as I don't see any open hots.
Below is a diagram of what I did:
Due to common cold I only have one wire on that side. None of the wires on the terminals are touching so I don't think it is shorting out or anything. As I mentioned above, the checker says (NO LIGHTS) I have an open hot, but I am wondering if it could be something else as I don't see any open hots.