Stainless steel coil for chiller or HERMs

HomeBrewTalk.com - Beer, Wine, Mead, & Cider Brewing Discussion Community.

Help Support Homebrew Talk:

dahlseid

Active Member
Joined
Apr 9, 2015
Messages
44
Reaction score
2
Location
Saint Peter
A recent upgrade has left me with an extra 304 stainless steel coil that may be your opportunity.

Coil is 32' feet, 11 mm outer diameter (~7/16" inch) and 9.5 mm inner diameter (~3/8" inch), ends capped with sanitary fittings (1.5" inch Tri-clover/Tri-clamp/TC fittings)

Coil was originally part of a 16 gallon hot liquor tank made by Stout Tanks and Kettles

$85 OBO

IMG_6322.JPG
IMG_6326.JPG
IMG_6327.JPG
Will ship, buyer pays shipping
 
OP
dahlseid

dahlseid

Active Member
Joined
Apr 9, 2015
Messages
44
Reaction score
2
Location
Saint Peter
The coil is 7.125” diameter, though the fittings stick out 3.75” and 3.25-3.5” for the higher and lower ones, respectively. The height of the coiled section, 17 turns, is 8.375”. The height to the top of the higher fitting 14.25”
 
Last edited:
OP
dahlseid

dahlseid

Active Member
Joined
Apr 9, 2015
Messages
44
Reaction score
2
Location
Saint Peter
Height and diameter?
The coil is 7.125” diameter, though the fittings stick out 3.75” and 3.25-3.5” for the higher and lower ones, respectively. The height of the coiled section, 17 turns, is 8.375”. The height to the top of the higher fitting 14.25”
 
Last edited:
Top