SS and cooler MT

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

DevilsCreekBrewing

Well-Known Member
Joined
Sep 20, 2009
Messages
214
Reaction score
1
Location
Cambridge Ontario
No copper was injured or killed during the filming of this MT.

DSC09428.jpg


DSC09427.jpg


DSC09357.jpg
 
Able to get an accurate enough reading with that thermometer?
Looks cool, I might have to try something like that.
 
Able to get an accurate enough reading with that thermometer?
Looks cool, I might have to try something like that.

Readings seem fine, I have checked with another thermometer. I do need to stir the mash more frequently than with my other tun, but I think that may be due to the 5ga size more than anything.
 
So do check the top and bottom of the mash, if so how big of a swing do you see from top to bottom
 
So do check the top and bottom of the mash, if so how big of a swing do you see from top to bottom

I don't see a swing per se, what I think is happening is that the SS valve and T is cooling down the thermometer probe. I stir the mash, and the reading comes back up a few degrees, and matches the reading on the loose thermometer I have.
 
Back
Top