Spa breaker box

[rsteckel]

Can anyone recommend a place to get a spa breaker box with gfci for a 30 amp circuit?

 

[LarMoeCur]

I don't think you will find one. Almost all spas will draw more than 30a. You can just buy the empty panel and put in a 30a gfci breaker from Homedepot. The empty panel is like 12 bucks.

 

[sasky7777]

Most people just use the 50 amp spa breaker for the the gfi capability and then a 30 amp breaker in your home's panel for the actual circuit overload

 

[BowAholic]

I have a new spa box with GFCI breaker that I don't need since I went a different route. I would make you a good deal on it since I haven't listed it yet. If my offer breaks any rules... I take it back.

 

[Totally]

In Canada there are a number of online spa companies selling 30amp breaker box kits.

This is the one I am looking for my setup.

http://www.poolandhottubdepot.com/eaton-culter-hammer-30-amp-gfci-hot-tub-pool-spa-pack/

That price is in CDN. The breaker alone goes for around $180CDN so the kits are a great price.

 

[GTACanuck]

In Canada there are a number of online spa companies selling 30amp breaker box kits.

This is the one I am looking for my setup.

http://www.poolandhottubdepot.com/eaton-culter-hammer-30-amp-gfci-hot-tub-pool-spa-pack/

That price is in CDN. The breaker alone goes for around $180CDN so the kits are a great price.

That is a STEAL! Just bought one.

 

[augiedoggy]

That is a STEAL! Just bought one.

Wow It not a good deal down here.. Its $129 for us in the states compared to the 50A eaton boxes which are only $50 with shipping... for $130 you can just buy a 30a gfci breaker for your main panel. I use a $15 30a breaker in my main box with a 50a gfci box which was $55 at home depot for my setup.... I wonder why prices are so inflated up there..

 

[GTACanuck]

Wow It not a good deal down here.. Its $129 for us in the states compared to the 50A eaton boxes which are only $50 with shipping... for $130 you can just buy a 30a gfci breaker for your main panel. I use a $15 30a breaker in my main box with a 50a gfci box which was $55 at home depot for my setup.... I wonder why prices are so inflated up there..

I know, its crazy what we pay for stuff up here. Home Desperate wants $229 for just a 50A GFCI breaker for your main panel, so the $129 price tag for everything is technically a "good deal" lol.

Im telling you augiedoggy, its been quite the experience pricing out my Kal panel clone and buying all the parts. For expample Packard C230B contactors in the states are $6-8 on amazon with free shipping on Amazon. Amazon.ca they are $26 + $7 for shipping. Its insane.

All in all, I will have build a complete Kal clone for just under $1000 CDN, but its taken lots of research and bargaining to get it done for that price. That also includes buying the pre-cut box from Auber for $130 USD.

 

[augiedoggy]

I know, its crazy what we pay for stuff up here. Home Desperate wants $229 for just a 50A GFCI breaker for your main panel, so the $129 price tag for everything is technically a "good deal" lol.

Im telling you augiedoggy, its been quite the experience pricing out my Kal panel clone and buying all the parts. For expample Packard C230B contactors in the states are $6-8 on amazon with free shipping on Amazon. Amazon.ca they are $26 + $7 for shipping. Its insane.

All in all, I will have build a complete Kal clone for just under $1000 CDN, but its taken lots of research and bargaining to get it done for that price. That also includes buying the pre-cut box from Auber for $130 USD.

Well probably be in the same boat soon enough if Trump imposes promised tarrifs so dont feel bad.
If that "GTA stands for greater toranto area your only about an hr and a half from me since im right over the border... of it were somehow cheaper and still legal do do so Id say ship it here and pick it up and drive it across..

its crazy though because I built my old panel pictured in my avatar for under $300!

 

[GTACanuck]

If that "GTA stands for greater toranto area your only about an hr and a half from me since im right over the border...

You would assume correct sir.

Sorry for going