Show us your Kegerator

[dantastic01SS]

Here's mine. Although it's not as nice as some on here, it does it's job with plenty of attitude! :rockin:

 

[Ben25]

Here's mine. It's a work in progress. It's a Haier 4 cubic foot that just barely fits 2 kegs. I even had to cut off the things that held the shelves so I could fit 2. I may expand to 2 taps, but one was all I could afford for now.

 

[Shonuff]

Here's mine. Although it's not as nice as some on here, it does it's job with plenty of attitude! :rockin:

Are you kdding me? That thing kicks A$$!

 

[MoRoToRiUm]

Here's mine. Although it's not as nice as some on here, it does it's job with plenty of attitude! :rockin:

Love the :rockin: the old fridged air! Nice work- I know you painted the fridge, but is the cross painted on or sticker?

You must have some tall glasses with how far those trays are down

 

[dantastic01SS]

Love the :rockin: the old fridged air! Nice work- I know you painted the fridge, but is the cross painted on or sticker?

You must have some tall glasses with how far those trays are down

The cross is cast iron and screwed on. My girlfriend bought it to hang on the wall but I found a better use for it.

 

[OregonNative]

I hate you guys... I've been wanting to setup a kegerator for a long time now. I think I'll have to get around to it soon. You guys have inspired me.

 

[lou52onu]

love the sticker on the frig. Could you send me a close up of it and/or tell me where you got it?????

 

[Gonefishing]

I hate you guys... I've been wanting to setup a kegerator for a long time now. I think I'll have to get around to it soon. You guys have inspired me.

Craigslist is our friend you know.... go for your project! Unless you're a procrastinator like me...which is a habit I'm gonna kick someday!

 

[Benthic]

Here's mine. Although it's not as nice as some on here, it does it's job with plenty of attitude! :rockin:

Looks great! I like the matte paint job.

Brian

 

[IrregularPulse]

yep, fridge looks great Dantastic

 

[IrregularPulse]

My kegerator is so much cooler than any three of these combined no contest!

Yes, I'm sure you're Party Pig is wonderful!

 

[dantastic01SS]

love the sticker on the frig. Could you send me a close up of it and/or tell me where you got it?????

It's cast iron and screwed to the door. My girl got it on ebay for less than 10 bucks.

 

[Rook]

Got mine built this weekend, no homebrew in it yet (kegs will get here on in 4 days and I'll get them filled here pretty soon). I have the ability to swap out for homebrew or sanke style kegs whenever I want.

 

[joety]

Looking good. I have the ability to swap as well, but mine is a little more low tech. I just put FFL fittings on both my gas and liquid lines where they attach to the keg connectors and I found MFL fittings that work with a hex nut for the sanke tap.

 

[BeezBrew]

Got mine built this weekend, no homebrew in it yet (kegs will get here on in 4 days and I'll get them filled here pretty soon). I have the ability to swap out for homebrew or sanke style kegs whenever I want.

Very nice, what beer from Georgetown brewery do you have on tap? I miss their beer....

 

[mmb]

That MicroMatic kit is friggin' AWESOME! I'm going to have to do my commercial tap like that!

 

[Rook]

Its Chopper's Red Ale on tap (SO GOOD) My homebrew kegs are getting delivered tomorrow, so I'll get a couple more going here pretty soon.

Also, while I got everything from micromatic, its not a kit so much as a conglomeration of a bunch of their parts. I upgraded almost everything, Faucets, shanks, tail pieces, are all stainless. The regulators are top of the line, hand adjustable, and the homebrew connects are all removable to hot swap out as needed/desired.

I'm going to return the 6" drip tray, its too small and the big ones are too effing expensive for me.

 

[MrNate]

Here's mine. Although it's not as nice as some on here, it does it's job with plenty of attitude! :rockin:
...

Dude, you have the awesomest kegerator ever. You need a set of baby moons on that puppy.

 

[MoRoToRiUm]

I'm going to return the 6" drip tray, its too small and the big ones are too effing expensive for me.

FYI- 19' Drip tray $14.95. A lot of users have gone with these are are quite satisfied

 

[IrregularPulse]

FYI- 19' Drip tray $14.95. A lot of users have gone with these are are quite satisfied

just measured my spot and this will be perfect for me. thanks. Should be posting pics in the next week of it completed through stage 1

 

[BierMuncher]

FYI- 19' Drip tray $14.95. A lot of users have gone with these are are quite satisfied

I love mine:

 

[IrregularPulse]

BM, Mind taking a measurement front to back? I need to make sure it won't stick out farther than the spot I have allotted. I appreciate it man.

 

[BierMuncher]

BM, Mind taking a measurement front to back? I need to make sure it won't stick out farther than the spot I have allotted. I appreciate it man.

Just a pube +/- of 4". I used a 4" L-brackets from Lowes for the Keezer and my rolling kegger and it fits flush.

 

[IrregularPulse]

Interesting, my rig is pretty precise though, what kind of pube we talking here? Native American, Caucasian, or African American?

 

[keiths]

Here is mine I built a new one last week. I tried to get as much of the stuff on the outside as I could to leave more room inside.

 

[Kilgore_Trout]

I love the stout tap handle keiths, never seen that before.

Nice selection hopefully Christmas will get me started this way!

 

[keiths]

1968 ford 4sp knob & did ya notice the 94 Camaro Z28 carbon fiber shifter
for the Munich dunkel.

 

[Lumpy_Gravy]

Finally finished put on the drip tray and figured I would add mine to the thread.

 

[KellyL]

I have been lusting after a kegerator for years. (I bookmarked this on page 13) I finally got a one keg setup and I'm currently using a picnic tap with some Killians. I havent brewed in a while because we just moved to IL from TX. Christmas drained most of my expendable income so now I have to wait or piece my rig together.

Here are a few questions.

-Can I put the Co2 in the freezer and plumb the lines into the fridge?
-Do you need a fancy distribution manifold or can you make one out of brass pipe and check valves?
-Should I get rid of the shelving on the inside of the door and put up some masonite?

I'm looking to put in at least one, but hopefully two shanks soon and would like to make the inside look as clean as possible in regards to plumbing and such. I'm thinking that the tank in the freezer with just a line going into a gas manifold will look neater than a bunch of tubing. Not that there's anything wrong with that. Any suggestions?

 

[Mustangfreak]

I could have sworn I posted mine in here, so here it is. Its not finished, and getting it done is on the back burner right now

As it sits right now

It fits 4 kegs nice and snugly.