44047 - no shipping on large items. I'd like to sell as a whole for now (at least brewing / kegging), but please express interest and if we can get enough people going to split stuff I will. Everything is top quality, there are no off brands or cheap parts. Everything was done right to make it easy to maintain and clean (quick disconnects, all new seals etc. for hassle free use).
Brewing: $500 cash picked up
MoreBeer 26 Gallon Mash Tun - BE726($429 new) - has shut off valve and thermometer, along with food grade thermoplastic hose whip and connector.
Burner - BG10 burner on custom welded heavy duty built stand with windscreen, you can find my CAD drawing of it on here. Lots of people have asked for it.
Hi output propane tank regulator (30psi I believe off of the top of my head)
No Chill Containers (2) - food grade 6 gallon white winpack75032
Racking cane, stainless stirring spoon.
BIAB bags made for this kettle.
Kegging $950 picked up
Everything you need for a kegging system. I'll even toss in the fridge if you want. Everything is set up on disconnects, from gas to beer for the most simple method of cleaning and replacing parts as needed.
Gas:
Dual Regulator - on line set up to feed kegs, one set up with a long cord on the outside of the fridge to seal and prime kegs after filling
20# CO2 tank
3 way air distributor in fridge.
Hose
Extra gas disconnect
Ball lock disconnects (mfl with barb)
Hose clamps
Beer:
3 -"New Style" 525 SS Perlick Faucets - all have been completely rebuilt/ SS tailpieces
1 HAS 4" SHANK, (2) 4 1/8" SS shanks
Various commercial tap handles
3 (I think) Ball lock Corny Kegs. All seals etc have be replaced as new.
All new beer hose, an entire rubbermaid tote full of tons of misc parts, cleaners, extras, etc. to get you going. I also have everything in spreadsheets for efficiencies / recipes if that interests you.
Temp controller for fridge.
Micromatic Sanke D Connector with quick disconnects
Homemade temp controller with probe
Brewing: $500 cash picked up
MoreBeer 26 Gallon Mash Tun - BE726($429 new) - has shut off valve and thermometer, along with food grade thermoplastic hose whip and connector.
Burner - BG10 burner on custom welded heavy duty built stand with windscreen, you can find my CAD drawing of it on here. Lots of people have asked for it.
Hi output propane tank regulator (30psi I believe off of the top of my head)
No Chill Containers (2) - food grade 6 gallon white winpack75032
Racking cane, stainless stirring spoon.
BIAB bags made for this kettle.
Kegging $950 picked up
Everything you need for a kegging system. I'll even toss in the fridge if you want. Everything is set up on disconnects, from gas to beer for the most simple method of cleaning and replacing parts as needed.
Gas:
Dual Regulator - on line set up to feed kegs, one set up with a long cord on the outside of the fridge to seal and prime kegs after filling
20# CO2 tank
3 way air distributor in fridge.
Hose
Extra gas disconnect
Ball lock disconnects (mfl with barb)
Hose clamps
Beer:
3 -"New Style" 525 SS Perlick Faucets - all have been completely rebuilt/ SS tailpieces
1 HAS 4" SHANK, (2) 4 1/8" SS shanks
Various commercial tap handles
3 (I think) Ball lock Corny Kegs. All seals etc have be replaced as new.
All new beer hose, an entire rubbermaid tote full of tons of misc parts, cleaners, extras, etc. to get you going. I also have everything in spreadsheets for efficiencies / recipes if that interests you.
Temp controller for fridge.
Micromatic Sanke D Connector with quick disconnects
Homemade temp controller with probe