I just added a fan to my keezer in hopes the temp would distribute more and cut down on condensation but I have it only turn on with the controller. If you have a fan in your keezer are you running all the time?
I just added a fan to my keezer in hopes the temp would distribute more and cut down on condensation but I have it only turn on with the controller. If you have a fan in your keezer are you running all the time?
I just added a fan to my keezer in hopes the temp would distribute more and cut down on condensation but I have it only turn on with the controller. If you have a fan in your keezer are you running all the time?
I guess I will look at running the fan 24/7. It seemed wasteful but sounds like that is what most do.
No it isn't really, it takes a lot more power to start a fan, especially if it's cold and the bearings and or bushings are cold and tight. They will create more drag and consume much more power in starting than it was running. Overall, it is cheaper to run a fan 24/7 then it is to start it and stop it. This is especially true for motors that use capacitors for start.
(My daughter is currently enrolled in engineering classes quote she used motors, the one in our HVAC system in particular, to do a time and kilowatt study. We found that it actually saves about 1000 kilowatts over the course of a year to run it 24/7 rather than starting it when needed. We have kept the fan on for the last 16 months constantly and we have better temperature control and air quality because of it.)
I guess I will look at running the fan 24/7. It seemed wasteful but sounds like that is what most do.
Ever since I started using this I have zero condensation issues.
http://www.amazon.com/dp/B000H0XFD2/?tag=skimlinks_replacement-20