Wildknight65
Member
- Joined
- Aug 17, 2017
- Messages
- 20
- Reaction score
- 5
Hi there. My keezer has two kegs full with beer nicely pressurised and pouring well at 10psi. I went to connect a third keg this morning with some water and sanitiser, hooked up the third gas line and as I went to turn the gas on at the manifold. The gas started to fill the keg, but the regulator was clicking as it was filling. I let it go till the clicking stopped, sprayed around for leaks and nothing visible. Started to pour the sanitizer and as the gas was refilling in the keg the clicking started again. The kegs obviously getting pressure, but a little unsure what this clicking from the reg is all about. Never heard it before. The needle almost bounces up and down between 10-15psi and eventually stopped once pressurised. Any ideas?