Regulator mishaps

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Big10Seaner

Well-Known Member
Joined
Feb 7, 2008
Messages
671
Reaction score
8
Location
Schaumburg
For some unknown reason, my taprite regulator isn't working properly. It's under a year old. The minimum psi I can set it is 8 psi while the max is around 28 psi. I am unable to turn the screw below or beyond those numbers. I'm thinking it might have gotten something in it, but I'm a little confused since I have a 4 way manifold with check valves. I bought it from Keg Connection- do they offer any kind of warranty on something like this?
 
Did you open up the line after adjusting the regulator? Often times it won't register to a lower setting until you bleed off the pressure in the line.
 
Back
Top