Racking into a Keg using a Closed Loop System

[Brewmegoodbeer]

Check out a way that I came up with to rack from my fermenter into a keg with minimal oxygen exposure. I used tubing attached to a gas disconnect as my blow off tube (had a carbonation cap connected to the disconnect going into some sanitizer). I purged all tubing with co2 before performing this. I purged a keg with co2, then racked into the keg straight through the dip tube using a liquid disconnect, and co2 is sucked back into the fermenter from the keg through the tubing that was originally my blow off tube. I call it a closed loop system. I am sure people have done this before, but check it out!

https://youtu.be/RVilNE_ewo0

 

[day_trippr]

Look down to the bottom of this page

 

[Brewmegoodbeer]

I knew it was too good for me to make up. Haha

 

[day_trippr]

Still, you came up with it on your own, so you get points

Cheers!