NervousDad
BFM
I just installed my propane manifold and checked it for leaks so far it works okay, but I just wanted to get a double check to make sure I didn't do anything dangerous.
I built it using 1/2 black iron and sealed the joints with pipe sealant rated for gas. I used the yellow Teflon tape on the brass fittings and the flange fitting are dry fitted.
When I shut the burner off on the right for the first few times it would backfire. I adjusted the air mixture and it appears to be working better.
I built it using 1/2 black iron and sealed the joints with pipe sealant rated for gas. I used the yellow Teflon tape on the brass fittings and the flange fitting are dry fitted.
When I shut the burner off on the right for the first few times it would backfire. I adjusted the air mixture and it appears to be working better.