Primo Stir plate made easy

[Xalwine]

So far we have quite a few out there and nobody has posted any results. Come on guys are we making beer yet?

I used it just yesterday to mix in my campden tablets into a wine i made a while back. worked wonderfully! I couldn't snap any pictures because every time I would go to grab my phone, I'd get a carb-up. all the carbonation was flying out of it! overall a wonderful item, Thank you BigBeavk! I'll try to take pictures of the starter I'll have going with my next brew this coming sun-tues.

Also, Can I get added to the list again? If not, that's ok.

 

[Bigbeavk]

Bigbeavk,
you have any information on where to purchase these 3" and 5" stir bars?

I found the 3" x 1/2" on ebay along with a 3/4" X shaped one. Of course you could always get them from VWR or many other Lab supply companies.


Awesome news Axlwine glad to here the good news. And yes you sure can get on the list again. It will take some time but sooner or later it will happen.

 

[boomtown25]

Please add me to list. Thanks!

 

[TripleHopped]

Add me to the list too. Nice job with these.

 

[cyberbackpacker]

Put me on the list!

 

[Bigbeavk]

No problem guys though It may take more than a year to get through all the requests we have up to this point as I have not taken the time to count them all.

Let's make this the cut off point for now just to keep things simple.

 

[Bigbeavk]

I_B_Mongo you have a message! I have one ready to go!

 

[I_B_Mongo]

Payment sent! THANKS SO MUCH!!! Looking forward to it!

 

[eleets2144]

Received mine while I was out for vacation, I'll try to post pics soon.

I think I need some bigger magnets though, I seem to throw the bar at about half speed

 

[Marquez]

subscribed

 

[Bigbeavk]

LOL just realized I sent one out of order but oh well I got a little mixed up in messages.
Moving on here's a little update.

I_B_Mongo Received
eleets2144 Received
Fetus
wolverinebrewer
rboucher
dave2851
63belair
BrewBeemer
1ratdog
mkultra69
JetSmooth
bodhi314
isquitar
rfavors
Castermmt
Big10Seaner
originalben
RonRock
Crackhead
modobrew
jarod7736
nelgig
Maverick1903
Bachus
Lutinplunder
2DogsBrewing
Lilrascal
Native302
Jublin
mmurray
mcwiler
AxlWine
boomtown25
Liquid Gold
cyberpacker
Vfib
Artemisag
trl2112 rescheduled

 

[Artemisag]

I would like to be on the list also. Thanks!

 

[Bigbeavk]

trl2112 Message Sent!

 

[I_B_Mongo]

The stir plate was sitting on the front steps when I got home from the station this morning! What a great way to start the day. Thanks again Keith! I'll report back with some pics once I get it put to use.

 

[bodhi314]

10 more!!

I wish i could find that awesome excited kid .gif LOL

Thank you for keeping up with this!

 

[Bigbeavk]

10 more!!

I wish i could find that awesome excited kid .gif LOL

Thank you for keeping up with this!

Just right click on the one in the post and save it to your computer. Then I think you have to upload it to Photobucket or some other online photo account and use it all you want.

FYI I made a 1500ml starter last weekend and just ran it at 400rpm for 2 days. That starter looked like a creamy starbucks ice coffee drink when I pitched it. Probably had way more yeast than I would need. They are eating well in my barleywine. I vortex-ed it a little to start just to get some air in there but shaking it would have done the same thing. I'll gets pics next time since I was so focused on the brew day.

 

[jsguitar]

Hey, I'm 11!

You're a trooper Bigbeavk! Thank's for keeping up with this.

 

[purplehaze]

If there are any left add me to the list, thanks.

 

[mredge73]

I just stumbled upon this, great idea, Please Add Me!

 

[bovineblitz]

I'd like to be added to the list if you come across that many. You don't have to spend time to take it apart, I'd like to see how well it does as an orbital shaker... idk that a stir bar would be better, yeast labs at breweries typically use shakers as far as I know.

 

[Bigbeavk]

Message sent for Fetus. I'll be on vacation next week so when I get back I'll be able to send one out. I'll be looking for your message.

 

[Jublin]

You can take me off the list. I ended up finding an older Fisher stirplate on ebay for 20bux.

 

[starsailor]

I'd like one of these too. Please add me to your list and I'll be looking for your message regarding availability. Thanks for doing this!

 

[Bigbeavk]

Message Sent to wolverinebrewer

Update
I_B_Mongo Received
eleets2144 Received
FetusReceived
wolverinebrewerReceived
rboucher Received
dave2851
63belair
BrewBeemer
1ratdog
mkultra69
JetSmooth
bodhi314
isquitar
rfavors
Castermmt
Big10Seaner
originalben
RonRock
Crackhead7
modobrew
jarod7736
nelgig
Maverick1903
Bachus
Lutinplunder
2DogsBrewing
Lilrascal
Native302
mmurray
mcwiler
AxlWine
boomtown25
Liquid Gold
cyberpacker
Vfib
Artemisag
trl2112

I'm really enjoying the heck out of this

 

[RonRock]

That's quite a list! But at least I'm on it. Yeah!

Seems like you have put out a lot of effort on this. Cheers to you.

Ron

 

[Bigbeavk]

I'd like to be added to the list if you come across that many. You don't have to spend time to take it apart, I'd like to see how well it does as an orbital shaker... idk that a stir bar would be better, yeast labs at breweries typically use shakers as far as I know.

These would need a new rubber gasket in order to use as a shaker. It would not be to difficult to order a piece of rubber from mcmaster carr and punch some holes in it or figure out another way to keep the plate from rotating. I'll try to remember when your name comes up though.

 

[Fetus]

Got mine yesterday. Tested it, and it works great! Thanks, Bigbeavk!

 

[Bigbeavk]

Awesome now get brewing lol!

 

[forcabrew]

Awesome now get brewing lol!

i know im late to the party(as usaual). but if you wouldnt mind adding me to that list i would greatly appreciate it.

thanks

 

[absoluthamm]

That is a really nice looking console there, great find. I know it'd be a while, but I'll get on the list as well. I have a rigged one with a servo from an old hard drive and it's not doing so well, not to mention I can't put more than a flask on top, having my whole carboy on would be so nice.