After 7 months of pico brewing it's now confirmed I am missing a part! LOL It's just a hose clamp but I've had wort go all over the place once before and found the hose disconnected. Never realized it was suppose to be clamped. Today I heard it pop off 5 minutes from the end of brewing and then there was a puddle of wort on the counter. This time I reminded them of my issue before (which occurred at the same time roughly as the failed shuttle pumo).
That's when they answered back that they are sending me a clamp. I am attaching the photo that I sent them so you all can check to see if you have a clamp on all 5 tubes that connect in the bottom next to the shuttle pump. The black clamps do not show up against the black plastic so I didn't notice the clamps on the other hoses.
That's when they answered back that they are sending me a clamp. I am attaching the photo that I sent them so you all can check to see if you have a clamp on all 5 tubes that connect in the bottom next to the shuttle pump. The black clamps do not show up against the black plastic so I didn't notice the clamps on the other hoses.