I'm at the stage where I'm ready to coat the frame. I started off with high-temp paint but after the massive amount of paint it's taken and the fact it needs to be properly cured, I've decided powdercoating may be a better option.
However, I had a setback today in that the powdercoater didn't want to touch the frame as they're deathly afraid it's not going to withstand the heat and I'll be knocking in their doors.
So I'm here to find out how well the powdercoated frames have been holding up. The stand is built out of 2" square mild steel. The wind shields are 3" mild steel strip. It looks like I may need to cut these out and convert to stainless around the burners and then powdercoating may be ok.
Any advice would be appreciated. Open to other suggestions too.
However, I had a setback today in that the powdercoater didn't want to touch the frame as they're deathly afraid it's not going to withstand the heat and I'll be knocking in their doors.
So I'm here to find out how well the powdercoated frames have been holding up. The stand is built out of 2" square mild steel. The wind shields are 3" mild steel strip. It looks like I may need to cut these out and convert to stainless around the burners and then powdercoating may be ok.
Any advice would be appreciated. Open to other suggestions too.