PCO 1881 Threaded Thermowell?

[agentbud]

My fermentation lid has an extra port where a carbonation QD would normally screw onto, but I would rather add a thermowell there. The threads on that port are PCO 1881. Anyone aware of a thermowell that will screw onto PCO 1881 threads?

 

[Bobby_M]

I can weld a thermowell to a stainless carbonator cap to make that.

 

[fluketamer]

to make sure this worked i threw this together in 5 minutes.

more beer sells the thermowell with duotight bulkhead and the 1881 cap with predrilled hole. but that seems a little silly. you can just drill a hole in any 1881 cap .

FermZilla Thermowell w/ Duotight Bulkhead - 23.6 in. | MoreBeer :

Replacement Airlock Cap for FermZilla Lid | MoreBeer :

you may have to widen the hole on the more beer cap but i dont think so.

brew on

 

[agentbud]

I can weld a thermowell to a stainless carbonator cap to make that.

Thanks Bobby but I think I have something per the last post above... If it ends up leaking I will circle back to you

 

[agentbud]

to make sure this worked i threw this together in 5 minutes.


View attachment 838378




more beer sells the thermowell with duotight bulkhead and the 1881 cap with predrilled hole. but that seems a little silly. you can just drill a hole in any 1881 cap .

FermZilla Thermowell w/ Duotight Bulkhead - 23.6 in. | MoreBeer :

View attachment 838379


Replacement Airlock Cap for FermZilla Lid | MoreBeer :


View attachment 838380


you may have to widen the hole on the more beer cap but i dont think so.

brew on

yep, I already had that fermzilla thermowell kit and after making my original post above, I also put together something similar to this. Hopefully that will do the trick