Need to find good NG burners for brewstand (ex. Hurricanes)

[HomeBrewFoSho]

Does anyone know anywhere that have just the Hurrican burners for Natural Gas for sale. I don't want the stand just the burner itself. Or have anyone made the "Banjo" burner work by drilling it out? Thanks, Greg

 

[azscoob]

I just did a search on amazon for natural gas hurricane burner, a few examples there, also check ebay, there should be dozens there

 

[azscoob]

like these? you could drill out the propane burner to work with NG but I am not sure on bit size or if it would work with a particular burner, I drilled my propane grill to operate on NG, I found instructions online in a forum somewhere

 

[HomeBrewFoSho]

The problems I've read about those wok burners from many members here is that there is next to no adjustment and if you do adjust them down they turn the bottom of your keg/pot a nice chared black color.

 

[azscoob]

Here is a basic chart for converting from propane to NG. its a start, and may help out in converting a burner. I used trial and error to convert my grill to NG, I started lower than the recommended bit size and worked up til I had a good color flame based on my water column reading at the line into the grill

 

[HomeBrewFoSho]

Nevermind I just found out that the "Banjo" burner is the same as the "Hurricane" and that the conversion valve sold for the Hurrican screws right in. Don't know why I never found this before but someone has already done it sucessfully. Happy Brewing!