Hey. When i first built my fermentation chamber, there was a video that I found of someone wiring an Auberins temperature controller into an extension cord. You could set it to switch power to your refrigerator off and on depending on temperature. And i had a light bulb inside that would cut on, keeping the refrigerator in the range needed. Well, my temp controller went out. And I can't find this video. I need it to explain the wiring to me again. Anyone know what I'm talking about? Help a brother out please.
Need help with temperature controller for my fermentation chamber
- Thread starter EZFrag
- Start date
Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:
So you're getting a new temperature controller? If you buy something like this, you don't need to do any wiring, as it is designed to switch mains voltage on and off:
https://www.aliexpress.com/item/AC-...et-50-110C-NTC-Sensor-KT3008/32898240902.html
It's really easy. But if you need both heating and cooling, that thermostat wouldn't be suitable, so I see why you want to stick with the original design.
https://www.aliexpress.com/item/AC-...et-50-110C-NTC-Sensor-KT3008/32898240902.html
It's really easy. But if you need both heating and cooling, that thermostat wouldn't be suitable, so I see why you want to stick with the original design.
myndflyte
Well-Known Member
Here you go: https://www.amazon.com/dp/B01MDSWXY4/?tag=skimlinks_replacement-20
I own the same one and it works great.
I own the same one and it works great.
Last edited by a moderator:
