You won't find much on them on the web as far as brewing and brew stands. Ever since I started strutstands.com to sell kits I've been working with them and had several conversations with them about this thread I started, and the volume of hits they were receiving directly from this thread. They are not brewers, but pretty much saw the success I was having with selling kits and decided to start selling a kit themselves. They sell a lot of strut and fittings to the electrical and solar industries so they have the advantage of cutting strut and selling it with fittings at cost. But I would not expect to get much in the way of brewing advice, burner & pump mounting, etc. Also, stainless is nice, no doubt, but after a year or two of brewing believe me you won't be able to tell much of a difference between it and galvanized. The galvanized burns off, and the SS discolors. They both get pretty ugly looking. The powder coated lower sections are a nice touch. Galvanized that is not in direct heat holds up well too. I don't make a killing on the kits I sell. With shipping and the effort to get them cut, packed, etc, it's barely worth it to me. It is nice to see there are some options now with other vendors. Nothing better for the consumer than competition.