Cool, glad you were able to find the material and get a stand going. Just wondering if you were planning to make any changes, or if this is the way you were going to keep it going into brew day. I ask because I think there could be a potential for stability/structural problems with the way it is as posted in the picture. Let us know.
Also, not sure if you knew this or not, but one of the great things about strut is the built-in channel locking system. The strut profile makes for a channel on the underside that when used with the strut locking nuts, allows you to put a fitting anywhere you want, not just where there's a hole/slot in the top side of the strut. I ask because it looks like all of your bolt head are showing on the top side of the strut. If you look at my first original post you can see that all of the bolt heads are on the underside of the material, out of the way, and locked into the channel on the underside with the strut nuts. Just wondering if you knew and just wanted to do it a different way, or if you did not know about the channel and associated nuts.