Mitch's Electric Brewery Build

[mnoltimier]

It is the Blichmann 14.5 gallon fermenator. The freezer model is LFFU14F5HWN and I bought it from Lowes. If you use this freezer you will have to take out the door shelf and put in a piece of plastic (also from Lowes) cut into the right shape. You will also have to break the high temp alarm that goes off every couple of seconds because we obviously don't ferment below 20 degrees. So pull the control panel off the front of the door with your fingertips or flat head screw driver. It just pulls out. Than find a small black circle disc and pull it off with a pliers. I don't remember what the piece was called so make sure you google what the piece says to make sure. The electronic piece has a model number so you'll figure it out. Questions?

 

[SDBreWs0624]

Sweet

 

[docon86]

I bought all the DIY kits from Kal through Spike Innovations and followed the instructions 99% of the time. I would do it like this again.

Thanks for the response will have to place my order soon.

 

[MadGus]

Excellent build!

 

[Kalvaroo]

Great job on the build. I just ran through my inbox and saw one of your old messages that led me to this. You definitely don't need my crayola brutus wiring diagram anymore.

 

[Zeppman]

Hey mnoltimier, are you still using the hop stopper? I've got nearly the same setup, and the hop stopper is the only piece I wish I could change. Working on finding a solution for that now...