I have a bunch of miscellaneous electric brewing parts and quick disconnects that I've replaced on a system I bought on craigslist. I've done my best to describe them below. All for $300 obo shipped. Will part out after 1 week if no one wants it all.
If you're local in Denver I also have 4+ cases of bottles if you want them.
1 Electric element controller This is a discontinued version from highgravitybrew.com. I never used it and am keeping the Ranco controller that allows for automatic control. I believe this will work manually in an on/off configuration without a controller but one could be added for control.
2 - Outdoor outlet boxes configured like theelectricbrewery.com. I built these and never got a leakproof seal to my kettle and ended up having a tri-clamp fitting welded to the kettle. Maybe you can do better but not guarantees.
2 - Heating elements I got these when I bought my kettles on craigslist and never tried them. I believe they were originally from highgravitybrew.com but I cant guarantee they work. No longer attached to the cords.
2 - 220V, 6-ft, 30A, 3-prong "dryer type" cords with outlet (NEMA 10 30R) that were originally connected to the elements from highgravitybrew.com
4 - O-Rings. http://www.amazon.com/gp/product/B000FMYSEM/?tag=skimlinks_replacement-20
2 - Washers, http://www.amazon.com/gp/product/B006U241XY/?tag=skimlinks_replacement-20
2 - Strain Relief Cord Grips, http://www.amazon.com/gp/product/B006N2U1CQ/?tag=skimlinks_replacement-20
2 - 1 NPT Locknut , http://www.amazon.com/gp/product/B003GXF5EO/?tag=skimlinks_replacement-20
4 Polysulfone female quick disconnect x ½ Male NPT
http://www.highgravitybrew.com/prod...1-2-Male-Pipe-Thread-W-O-Shutoff-158p3342.htm
2 = Polysulfone male QD x hose barb
http://www.highgravitybrew.com/prod...ling-1-2-Inline-Hose-Barb-Insert-157p2437.htm
1 morebeer stainless female QD x hose barb
http://morebeer.com/products/female-stainless-steel-quick-disconnect-wbarb.html?site_id=9
1 morebeer stainless male QD x hose barb
http://morebeer.com/products/male-stainless-steel-quick-disconnect-wbarb.html?site_id=9
1 Inline GFCI 220v power cord
If you're local in Denver I also have 4+ cases of bottles if you want them.
1 Electric element controller This is a discontinued version from highgravitybrew.com. I never used it and am keeping the Ranco controller that allows for automatic control. I believe this will work manually in an on/off configuration without a controller but one could be added for control.
2 - Outdoor outlet boxes configured like theelectricbrewery.com. I built these and never got a leakproof seal to my kettle and ended up having a tri-clamp fitting welded to the kettle. Maybe you can do better but not guarantees.
2 - Heating elements I got these when I bought my kettles on craigslist and never tried them. I believe they were originally from highgravitybrew.com but I cant guarantee they work. No longer attached to the cords.
2 - 220V, 6-ft, 30A, 3-prong "dryer type" cords with outlet (NEMA 10 30R) that were originally connected to the elements from highgravitybrew.com
4 - O-Rings. http://www.amazon.com/gp/product/B000FMYSEM/?tag=skimlinks_replacement-20
2 - Washers, http://www.amazon.com/gp/product/B006U241XY/?tag=skimlinks_replacement-20
2 - Strain Relief Cord Grips, http://www.amazon.com/gp/product/B006N2U1CQ/?tag=skimlinks_replacement-20
2 - 1 NPT Locknut , http://www.amazon.com/gp/product/B003GXF5EO/?tag=skimlinks_replacement-20
4 Polysulfone female quick disconnect x ½ Male NPT
http://www.highgravitybrew.com/prod...1-2-Male-Pipe-Thread-W-O-Shutoff-158p3342.htm
2 = Polysulfone male QD x hose barb
http://www.highgravitybrew.com/prod...ling-1-2-Inline-Hose-Barb-Insert-157p2437.htm
1 morebeer stainless female QD x hose barb
http://morebeer.com/products/female-stainless-steel-quick-disconnect-wbarb.html?site_id=9
1 morebeer stainless male QD x hose barb
http://morebeer.com/products/male-stainless-steel-quick-disconnect-wbarb.html?site_id=9
1 Inline GFCI 220v power cord
Last edited by a moderator: