Are you still using a heavy WP and no dry hopping as your practice?
Do you enjoy the results?
Is it just as good or better than a WP and dry hopping?
Are you still getting great flavor and aroma from just a heavy WP?
Sorry for all the questions. I'm thinking of using this technique as well and skipping the dry hop.
I have been doing this on and off - comparing to other processes. I would say this is a certainly a far easier and simpler process. I would also say that in my experimenting, it has gotten me results I am consistently pleased with - especially in comparison to how how little effort it takes.
That said, I would say for flat out "best" results - this is the process I now use for most of my pale ales and IPA's:
http://www.bear-flavored.com/2014/09/how-i-dry-hop-my-ipas-with-no-oxygen.html
It increases my turn around time to 21 days or even a bit more. But, in the end, it has resulted in the best hoppy beers I have brewed. (Not that the other way was bad..... just that I have found this to be better.) It would still come back to my priority though. If I wanted to turn around a really good, hoppy pale ale/IPA in 14 days - grain to glass - I absolutely would not hesitate to overdo the whirlpool/hopstand and skip dry hop. If I don't care that it takes a bit longer and am willing to do a few extra steps and take 21+ days..... I go with the above link.
This is my basic hopping pattern now in 6.5 gallon batches, 1.055 type beers usually.
60minutes = .75 oz.Warrior
Flame out = 3 oz. hops
Chill to 180 and let sit for 30 minutes/whirlpooling = 3 oz. hops
Day 5-6 in primary = 3 oz. dry hop
Day 12-14 = cold crash and gelatin in fermenter.
Day 14-16 = 2 day dry hop as outlined above in link 3 oz. hops
Day 17 = jump to serving keg
Day 17-21+ = force carbonate