Very Nice!!They have GREAT prices on cold plates and parts. I got my 6-beverage plate from them with fittings several years ago. Built my jockey box with it.
Keg faucets/taps - some dumb questions
- Thread starter mtnagel
- Start date
Help Support Homebrew Talk:
Matt "Mister Chicompany" runs a great shop, I've been buying stuff from him for well over a decade...
Cheers!
Cheers!
rmchair
Well-Known Member
- Joined
- Feb 8, 2009
- Messages
- 178
- Reaction score
- 76
Is there a trick to getting the perlicks apart? I cant seem to get the handle leaver out of the faucet. (I have the white plastic little collar.)
Edit: ah forward seal was blocking me. Seemed like that round piece was just to big.
Edit: ah forward seal was blocking me. Seemed like that round piece was just to big.
Last edited:
You're pulling the "Pearl" through the lower pivot ball O-ring. It ain't easy. Wet the insides and pull harder 
Cheers!
Cheers!
Since this was bumped, my as well share my "Don't do that" moment. So I bought the replacement o-rings, but the leaking stopped, so I didn't replace them. Then I woke up to a puddle on my finished basement floor Thankfully it was only carbonated water, but still a pain to deal with. I replaced the o-rings this weekend (what a pain in the butt to get them in place) and so far so good.
Thankfully it was only carbonated water, but still a pain to deal with. I replaced the o-rings this weekend (what a pain in the butt to get them in place) and so far so good.
