Kayakr1988
Well-Known Member
I built this keezer a while ago but am now postin some pictures.
I used 1 x 12 for the outside wall and 2 x 10 for the inside wall. The inside wall should sit on top of keezer rim with the outer wall hanging down over it so it won't slide.
Then I placed a 2 x 4 as a divider for the bar top and access door.
Next I cut plexiglass and plywood to fit In the space as the top and access door.
Put handles on the door and painted it all. To finish it up I sprayed foam on the bottom of the access door an bar top to insulate it all. As well as some foam insulating tape on the bottom of the inner wall.
I used 1 x 12 for the outside wall and 2 x 10 for the inside wall. The inside wall should sit on top of keezer rim with the outer wall hanging down over it so it won't slide.
Then I placed a 2 x 4 as a divider for the bar top and access door.
Next I cut plexiglass and plywood to fit In the space as the top and access door.
Put handles on the door and painted it all. To finish it up I sprayed foam on the bottom of the access door an bar top to insulate it all. As well as some foam insulating tape on the bottom of the inner wall.
![image-4069337735.jpg image-4069337735.jpg](https://cdn.homebrewtalk.com/data/attach/86/86324-image-4069337735.jpg)
![image-170145414.jpg image-170145414.jpg](https://cdn.homebrewtalk.com/data/attach/86/86325-image-170145414.jpg)
![image-117372926.jpg image-117372926.jpg](https://cdn.homebrewtalk.com/data/attach/86/86326-image-117372926.jpg)
![image-3584264345.jpg image-3584264345.jpg](https://cdn.homebrewtalk.com/data/attach/86/86327-image-3584264345.jpg)
![image-1908932632.jpg image-1908932632.jpg](https://cdn.homebrewtalk.com/data/attach/86/86328-image-1908932632.jpg)
![image-2163241103.jpg image-2163241103.jpg](https://cdn.homebrewtalk.com/data/attach/86/86329-image-2163241103.jpg)