• If you have bought, sold or gained information from our Classifieds, please donate to HomeBrewTalk and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Indiana - FS: EHERMS/Keggle setup

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jcharles00

Active Member
Joined
May 12, 2010
Messages
25
Reaction score
0
Location
Indianapolis
120V EHERMS setup including 3 keggles and wooden stands - Hot liquor tank, Mash tun and Boil kettle. HLT has a nice HERMS coil and 2x 2000W elements, Mash tun has a false bottom, Boil kettle has 2x 2000w elements. SS fittings and ball valves, temp sensors, silicone connecting hoses. Two march pumps included. (only one of the lids pictured is included)

BCS-460 brew computer included. I've only used it to monitor the temp sensors, but I'm also including the parts to build a control panel to switch the heating elements and/or pumps. I never got it all assembled - 6 SSRs, electrical outlets, inline GFIs etc.

Also includes a blichman wort chiller and a potable water hose.

If you want it, I'll throw in a rotomold conical/stand/triclover fitting. I'm convinced it's an infection machine, but I did do a couple of fine batches in it. I'll include a triclover butterfly valve too.

Selling it all together, no parting it out. price is $1000 firm. Local pickup only.

keggles.jpg


ssrs.jpg
 
Sure, I can do pictures if you tell me what specifically you want pictures of.

edit: here's a parts list

Keggle Hot liquor tank
-HERMS coil
-2x 2000W 120V elements
-Short dip tube
-5X SS ball valves
-6x nozzles
-3X SS T's
-1X SS "X"
-2X SS 90 degree pipes
-1X temp sender

Keggle Mash tun
-false bottom
-dip tube
-2X SS ball valves
-2X SS T's
-2X SS 90 degree pipe
-3X nozzles
-2X temp senders

keggle Boil kettle
-2x 2000w 120V elements
-2X SS ball valves
-2X 90 degree pipe
-1X T
-1X temp sender
-3X nozzle
-triclover clamp
-triclover flat panel & silicone gasket

wooden stand for HLT and Mash tun on casters
wooden stand for boil kettle

Electrical:
2X march pumps
BCS-460 brew computer
TL-WR700N portable router
6X 40A SSRs, each with heatsink
DIN rail dual outlet
DIN rail terminal block
3X 20A double wall electrical outlets
2X 20A 2 pole wall switch
2X 15A wall 1 pole switch / 1 outlet
2X inline GFIs
3X inline switches

Misc:
silicone hose
14X thumbscrew hose clamps
4X temp cables
1X Keggle lid
Blichman therminator wort chiller (no mounting bracket)
Backflow hose for therminator
Potable water garden hose
triclover butterfly valve
uninstalled weldless flex sightglass ( https://www.brewhardware.com/product_p/flexsight-l.htm )

Throwing in if you want it - ace rotomold 15g conical + stand/casters with triclover fitting (needs to have lid resealed)
 
Last edited:
Last edited:

Latest posts

Back
Top