After a few emails to the County, I received a detailed spreadsheet of the water report for my water source (most of the time anyway). I was attempting to use the Bru'n water sheet to help me calculate any additions I need but what my county sent me doesn't always match to what the Bru'n water sheet is looking for. For example, I have a Manganese level but nothing about Magnesium. I also have Sulfide and not Sulfate. In any case, I am hoping that someone here can shed some light on things for me. Chemistry was never my thing and despite reading various articles about water, I am still struggling to make sense of it. Below is the report for my source:
Any help is greatly appreciated.
Edit: If this belongs in the Brew Science forum, could a mod please move it there?
Thanks
Code:
Parameter W-25
pH 8.23
Turbidity (NTU) 0.24
Orthophosphate 0.21
Corrosivity 12.1 AGR
Alkalinity (Total) (mg/l) 325
Alkalinity (Bicarbonate) (mg/l) 310
Alkalinity (Carbonate) (mg/l) 1
Chloride (mg/l) 39
Sulfate (mg/l) 17.2
Color -PCU 5
Conductivity (umhos/cm) 750
Residue Total Filterable(Dried at 180 C) (mg/l) 478
Volatile Dissolved Solids (500 C) (mg/l) 60
Fixed Dissolved Solids (500 C) (mg/l) 416
Fluoride (mg/l) 2.04
Sulfide (mg/l) 0.03
Calcium Hardness (mg/l) 24
Hardness (Total) (mg/l) 28
Nitrate+Nitrite as N (mg/l) 0.05
Aluminum (mg/l) 0.05
Antimony (mg/l) 0.002
Arsenic (mg/l) 0.002
Barium (mg/l) 0.01
Beryllium (mg/l) 0.002
Cadmium (mg/l) 0.002
Chromium (mg/l) 0.01
Copper (mg/l) 0.01
Cyanide (mg/l)
Iron (mg/l) 0.05
Lead (mg/l) 0.002
Manganese (mg/l) 0.01
Mercury (mg/l) 0.0002
Nickel (mg/l) 0.01
Selenium (mg/l) 0.01
Sodium (mg/l) 163
Thallium (mg/l) 0.002
Zinc (mg/l) 0.01
Silver 0.01
Silica (reactive) (mg/L) 39
Any help is greatly appreciated.
Edit: If this belongs in the Brew Science forum, could a mod please move it there?
Thanks