Harbor Freight Angle Grinder

[Mirage]

I know others have used these, but I am just wondering if it is a good price and if it will last through cutting 3 kegs (didn't think I would ever hear myself ask that question about one of my prospective power tools). Thanks!

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=91223

 

[kevinkaseykizer]

wow, if you get it, let me know how it works good price

 

[humann_brewing]

I just mowed through my second keggle with the cheaper one from HF

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=95578

if you are patient, it is on sale for like $10 ever other week.

I use it for other stuff too and it is still kicking after a couple of years.

 

[inspector13]

I know others have used these, but I am just wondering if it is a good price and if it will last through cutting 3 kegs (didn't think I would ever hear myself ask that question about one of my prospective power tools). Thanks!

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=91223

It is very inexpensive and I wouldn't see why it wouldn't last through cutting three kegs. The cutting of kegs is a quick process.

 

[the_Roqk]

Harbor Freight actually sells some decent tools. Watch out for some tools that have been cast with pot metal. You just need to develop a keen eye for quality. That grinder that you've posted looks like it will do the job. I bought this kind http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=98107 last year and have abused it occasionally since. For the price it was worth it. If you get atleast a couple of years of normal wear and tear on the power tool you should come out ahead. Especially for that price.

 

[the_bird]

$18 plus another $8 for shipping... meh. My Ryobi, which I think was only $35 - $40 at Depot, got me through putting down pavers on my whole driveway, plus a crapton of other projects. I still just don't get the appeal of buying tools that I *know* and expect are going to fail, quickly. It ain't worth the inconvenience when a tool breaks in the middle of a job (IMHO).

 

[brrman]

I have used this HF grinder to build a retaining wall and cut about 100 stones with it... still works like a champ - although it is definitely not the same quality as the Bosch it replaced (I left it out in the rain... sigh).

However, I only wanted the HF one to finished the job. I do intend to buy another high end tool in the spring.

 

[Ohio-Ed]

I know others have used these, but I am just wondering if it is a good price and if it will last through cutting 3 kegs (didn't think I would ever hear myself ask that question about one of my prospective power tools). Thanks!

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=91223

I have this grinder, I also have a Makita. The Harbor Freight guard and handle are not as sturdy, but hey... the wheel spins and it has not "burned up" yet. I can tell you the one I have have has seen more use than it would take to cut 3 kegs. So it "should" do the job for you. That said, I would not promise anything on Harbor Freights quality control.

 

[springer]

mine just went bought it 8-10 years ago at HF. I have done patio pavers with it , retaining walls and lots of metal cutting . It will cut the three kegs and then some

 

[wizardofza]

I have this one and it fried after two kegs.

Although, I didn't have the correct cutting disk on it. I was using what I had at the time - a wider grinding wheel - not that thin cutting wheel.

Good luck.

 

[Mirage]

Thanks for all the replies! I don't do too much work with metal so really it would just be needed for this project and hence why I really don't want or need to buy a true quality, will last you a lifetime, product. I think if the price comes down to 9.99 I will pull the trigger. At that price, you really can't go wrong even if it does break. Thanks guys!

 

[lucasszy]

I have that same unit and its been a workhorse for everything around the house. Luckily I have a HF store down the street, so I dont worry about the shipping costs. I'd also recommend to wait for an email coupon from them. Sign up for their newsletter and you'll get a 10-15% off coupon about once a week.

Cheers

Lucas

 

[conpewter]

I bought that and have done several kegs with it. I think they are pretty good on return policy as well if it does break quickly.

 

[the_bird]

Still comes back to convenience. Get set up to do a project, then have a tool fail... that wastes the little free time that I have. There's absolutely nothing that pisses me off more than when I'm doing a project and something dumb happens, like I break the drill bit that I need, and I have to waste and hour and a half driving to Depot to buy a replacement. That's why I'm firmly in the camp of "don't chintz out on tools."

Even if nine times out of ten the grinder is fine, it would piss me off so much if it happened that one time that it's worth paying a few more dollars to get something that's better-quality - and multiply that by one hundred if replacing the tool means packing it up, a trip to the post office, and waiting two weeks for a replacement.

Still, that's entirely my opinion, and I understand that other people view this differently.

 

[conpewter]

Well I do have a harbor freight on the way home from work so I don't have to deal with shipping, and if I was really worried about it breaking during a project I could buy two for less than buying one from Home depot. Tools I use often I spend the money on (Dewalt cordless drill etc) but if I only plan to use it 3 times I don't spend a lot of cash on it. I also bought craftsman tools that were built 30 years ago that still work great (table saw, drill press, couple others) so you can get good tools for great prices as well.

 

[wilserbrewer]

That's why I'm firmly in the camp of "don't chintz out on tools."

Not sure buying a Ryobi rather than HF put you firmly in any camp....sorry Bird, but I think Ryobi is a rather inexpensive brand also, no?

 

[lucasszy]

Not sure buying a Ryobi rather than HF put you firmly in any camp....sorry Bird, but I think Ryobi is a rather inexpensive brand also, no?

Every Ryobi I've ever bought was crap.... So take it how you want!

Cheers

 

[Photopilot]

I know others have used these, but I am just wondering if it is a good price and if it will last through cutting 3 kegs

It will probably last through 3 kegs. It may almost kill you in the process. I have had one for years, bought it a decade or so ago. Used it for some light grinding on some wooden projects. It didn't matter there that the handle had broken. I tried to use it 2 months ago on metal. I was holding with one hand as it had no side handle. It jumped off the metal out of my hand and onto my leg. If it wasn't for my brand new double kneed, insulated Carharts it would probably have done more damage than it did, although it did plenty.

Lowes had a Hitachi for around $40 that I just used to cut through a keg. I feel safer with it and I know I will use it enough to make up for the $30 difference especially considering the cost of an ER visit.

Second the dissapointment on Ryobi, just as junky as HF but cost closer to real tool prices. HD would not warrant a 1mos old Ryobi tool, so if you want to buy junk stick with HF. I like HF, but not for fast moving power tools.

 

[the_bird]

Not sure buying a Ryobi rather than HF put you firmly in any camp....sorry Bird, but I think Ryobi is a rather inexpensive brand also, no?

Well, I don't buy Ryobi anymore. It was one of the first tools that I bought after I bought my house. I'd still buy a Ryobi over a Harbor Freight, because it's a hour to replace it IF it dies versus having to wait days for Harbor Freight (assuming that you're buying online because you linked to the site).

The angle grinder's taken a beating, though.

The Ryobi circ saw I own *is* a POS and due ti be replaced, and is why I feel strongly about this. Every time I use it, I'm pissed off that the blade won't stay square. Every time I use it, I wish I ponied up a little bit more upfront to have a better tool. It hasn't failed on me, though, unlike what I hear so many people say about Harbor Freight tools.

The Ryobi's at least aren't crapping out in the middle of the job, even if they aren't the best tools in the world.

 

[Catt22]

Not sure buying a Ryobi rather than HF put you firmly in any camp....sorry Bird, but I think Ryobi is a rather inexpensive brand also, no?

+1,000 Ryobi tools are cheap junk too. Disposable tools much like the HF stuff. I have lots of high quality tools and a number of the disposable type as well. IMO, it's smarter to buy the cheap junk for infrequent use. Tools for professionals are one thing and entirely something else for the weekend warrior. My oriental drill press works just fine, but I don't use it very often. Probably never will. It ain't no Stanley DeWalt for sure, but neither am I.

 

[Mirage]

That is kinda what I am thinking. For tools that I plan on using heavily or want to have for a while, I will purchase a quality product. I honestly have never purchased something like this before so just wanted to make sure that it would have a good chance on lasting through the cutting session.

 

[skarude]

I just recently bought an angle grinder for cutting a keg myself. I looked at that Harbor Freight one but it was $29 when I looked at it. I ended up getting this Porter Cable one from lowes for $40.

http://www.lowes.com/lowes/lkn?action=productDetail&productId=36866-79992-PC750AG&lpage=none

The nice thing about it is that the handle mounts in the middle which made it very easy to use the down and dirty PVC jig.

https://www.homebrewtalk.com/f51/simplest-keggle-cutting-jig-143048/

 

[Ohio-Ed]

The tools I have bought from HF are typically pretty simple tools that don't require a real tight tolerance and I don't expect a great deal out of them. I mean if you need a rock to crack a walnut, it probably doesn't have to be a name brand rock.

I have professional tools, some pretty serious DIY tools, and I have some rocks.

Most folks I know that have HF tools brag if they last a year because it's like money in your pocket... Not the same story with serious tools.

 

[the_Roqk]

The tools I have bought from HF are typically pretty simple tools that don't require a real tight tolerance and I don't expect a great deal out of them. I mean if you need a rock to crack a walnut, it probably doesn't have to be a name brand rock.

I have professional tools, some pretty serious DIY tools, and I have some rocks.

Most folks I know that have HF tools brag if they last a year because it's like money in your pocket... Not the same story with serious tools.

I have a wide array of power tools made in "China", and have used them extensively over the years (15+) with only minor problems. I have had some name brands such as Porter Cable, Black & Decker, Dewalt, Craftsman, Stihl, Hilti, Campbell Hausfield, Dremel, Skil, and even Ryobi fail within 3 years of purchase. To each his own. I still say if you have an eye for quality then go ahead and buy the damn thing. Tools; like humans break down with repeated use. It's a part of life. Just because something has a "brand name" on it doesn't make it a quality tool. On something as simple as an angle grinder the only thing that usually goes first are the brushes in the motor. If they are not replaceable then the product should be considered a "throwaway". Buy what you want. But it's good to keep in mind to buy something that you eventually will reuse again on some other project around the house.

 

[Ohio-Ed]

I have a wide array of power tools made in "China", and have used them extensively over the years (15+) with only minor problems. I have had some name brands such as Porter Cable, Black & Decker, Dewalt, Craftsman, Stihl, Hilti, Campbell Hausfield, Dremel, Skil, and even Ryobi fail within 3 years of purchase. To each his own. I still say if you have an eye for quality then go ahead and buy the damn thing. Tools; like humans break down with repeated use. It's a part of life. Just because something has a "brand name" on it doesn't make it a quality tool. On something as simple as an angle grinder the only thing that usually goes first are the brushes in the motor. If they are not replaceable then the product should be considered a "throwaway". Buy what you want. But it's good to keep in mind to buy something that you eventually will reuse again on some other project around the house.

Roqk, we are in agreement.
An angle grinder is a pretty simple tool. I had no problem buying it from HF (it came with replacement brushes by the way). If I need a tool that I will be counting on, I will buy a quality tool. I agree names do not automatically mean quality.

And btw... no offense intended when I mentioned cracking walnuts with a Roqk

 

[Mirage]

One more question, what do you guys think about this? Is it worth the extra cash? http://www.lowes.com/lowes/lkn?action=productDetail&productId=280027-67702-G12SR3&lpage=none

 

[ChasMcCall]

Buy the one that Harbor Freight sells for $10 every 2 weeks. I've used it for quite a while for a number of things, including cutting kegs, and I've had no trouble with it at all. It will cut kegs just as well as the more expensive models. Save the extra cash for something else.

While you're there get a couple cutting discs. They're $3 or $4 each or you can get a 9 or 10 piece set (grinding, cutting, polishing) for $10.

 

[skarude]

I would by the Porter Cable one for $5 cheaper than the Hitachi. It is 7amp and has a mount for the handle so you can use a jig like this.

 

[Mirage]

I really like the handle position there, but I have had terrible luck with Porter Cable products. The only thing that I have used that works the way it should is our laser level. Thanks for the help though.

 

[skarude]

NP...For what it is worth if the Harbor Freight one had been on sale for $10 instead of $29 I would have bought it.