Suggestions please. I've seen folks use their party tap with a piece of acrylic plastic tube.. like the kind used for bottling.. to fill a growler or bottles. I don't have a tube that fits tightly inside the party tap so I used a piece of vinyl tubing as a connector between the tap and the plastic filler tube.
Well, following what I thought was right, I filled the first part into a glass to get rid of the foam.. but, after that it all foamed. It was like a venturi .. in a carburetor where the gas expands. It was nothing but brew with minute bubbles flowing into the bottles.. ending up with about 3/4 of a bottle and the rest foam..
For those of you who have tried this.. how do you do it?
What pressure do you set the regulator at? My kegs are at about 45*. Do you burp and set at a lower temp or ?? Oh, my beer is at about 14 PSI in the keg. I have a Carbonator which says I should use 20-30 PSI for optimum results.
Don't want just foam.... Thanks for any help.. cuz I don't really want to make Blickman any richer if I can get away with it....
Well, following what I thought was right, I filled the first part into a glass to get rid of the foam.. but, after that it all foamed. It was like a venturi .. in a carburetor where the gas expands. It was nothing but brew with minute bubbles flowing into the bottles.. ending up with about 3/4 of a bottle and the rest foam..
For those of you who have tried this.. how do you do it?
What pressure do you set the regulator at? My kegs are at about 45*. Do you burp and set at a lower temp or ?? Oh, my beer is at about 14 PSI in the keg. I have a Carbonator which says I should use 20-30 PSI for optimum results.
Don't want just foam.... Thanks for any help.. cuz I don't really want to make Blickman any richer if I can get away with it....