Hello all,
I have somewhat of a garage cleaning of a thread. I have lots of misc. parts from my previous setup that I am looking to part with - a lot of this would be great together for someone building a new system. I will bundle parts for deal so if you want multiple items just send me a PM and we'll work it out. Open to all offers. Buyer pays shipping - must pay via Paypal. All items are in good working condition. Here we go:
Update International SPC-197 - 80/100 quart stainless stock pot cover with laser cut opening for viewing mash/boil. This fits any pot that is 20" in diameter - but is made for the 80 and 100 quart Update International pots which are also what for NB Megapots were and also what Morebeer sells as their heavy duty brew kettle. Replacement lid costs $40, last cut opening was $30, asking $50.
Qty 2 - March 809 PL Polysulfone replacement heads. Used twice. Asking $20 each.
Qty 2 - Cavagna Dual-Stage propane regulator - 160,000btu, 3/8" FPT outlet and 1/4" FPT inlet. Used once - perfect working order. Asking $20 each.
0-15 PSI adjustable propane regulator - 750,000 btu's. 1/4" FPT inlet/outlet. Used a handful of times. Asking $15.
0-30PSI adjustable propane regulator with 1/4"ID rubber hose, and quick disconnect. Connect to a 3/8" gas flare fitting (AKA 45 degree SAE). Used a handful of times. Has the green acme fitting good to 200,000btu's. Asking $40.
Assortment of brass valves. Qty 3 1/4" FPT brass ball valves - good for basic shutoffs. Asking $15 for all three. Qty 2 1/4" FPT inlet x 1/4" MPT outlet ball valves - asking $10 for both. Qty 2 1/4" FPT x 1/4" MPT needle valves - for fine control of gas - asking $15 each or $25 for the pair.
Assortment of 304/316 stainless fittings as follows (most pictured parts sold):
Qty 1 - 1/2" FPT half coupling. Asking $2.
Qty 2 - 1/2" hex nipples. Asking $2 each.
Qty 6 - 3/8" male flare x 1/2" MPT - NOT STAINLESS. These are chrome over brass I believe. Asking $3 for the lot.
Assortment of stainless gas connector hoses as follows:
Qty 3 - 24", 1/4" ID with 3/8 female flare on both ends. Asking $10 each. Rated for low pressure!
Qty 1 - 36", 1/4" ID with 3/8 female flare on both ends. Asking $10. Rated for low pressure!
Qty 2 - 16", 1/4" ID Stainless Steel braided hose with 3/8" carbon steel gas female flares ends. These are rated for pressures up to 2000PSI! These are custom hoses I had made. Cost me $38 per hose, asking $30 per hose. Never used. Good for high pressure and rated to 1500 degrees F. Bend radius is 5".
Qty 3 - 26", 1/4" ID Stainless Steel braided hose with 3/8" carbon steel gas female flares ends. These are rated for pressures up to 2000PSI! These are custom hoses I had made. Cost me $42 per hose, asking $35 per hose. Never used. Good for high pressure and rated to 1500 degrees F. Bend radius is 5".
Thanks in advance!
I have somewhat of a garage cleaning of a thread. I have lots of misc. parts from my previous setup that I am looking to part with - a lot of this would be great together for someone building a new system. I will bundle parts for deal so if you want multiple items just send me a PM and we'll work it out. Open to all offers. Buyer pays shipping - must pay via Paypal. All items are in good working condition. Here we go:
Update International SPC-197 - 80/100 quart stainless stock pot cover with laser cut opening for viewing mash/boil. This fits any pot that is 20" in diameter - but is made for the 80 and 100 quart Update International pots which are also what for NB Megapots were and also what Morebeer sells as their heavy duty brew kettle. Replacement lid costs $40, last cut opening was $30, asking $50.
Qty 2 - March 809 PL Polysulfone replacement heads. Used twice. Asking $20 each.
Qty 2 - Cavagna Dual-Stage propane regulator - 160,000btu, 3/8" FPT outlet and 1/4" FPT inlet. Used once - perfect working order. Asking $20 each.
0-15 PSI adjustable propane regulator - 750,000 btu's. 1/4" FPT inlet/outlet. Used a handful of times. Asking $15.
0-30PSI adjustable propane regulator with 1/4"ID rubber hose, and quick disconnect. Connect to a 3/8" gas flare fitting (AKA 45 degree SAE). Used a handful of times. Has the green acme fitting good to 200,000btu's. Asking $40.
Assortment of brass valves. Qty 3 1/4" FPT brass ball valves - good for basic shutoffs. Asking $15 for all three. Qty 2 1/4" FPT inlet x 1/4" MPT outlet ball valves - asking $10 for both. Qty 2 1/4" FPT x 1/4" MPT needle valves - for fine control of gas - asking $15 each or $25 for the pair.
Assortment of 304/316 stainless fittings as follows (most pictured parts sold):
Qty 1 - 1/2" FPT half coupling. Asking $2.
Qty 2 - 1/2" hex nipples. Asking $2 each.
Qty 6 - 3/8" male flare x 1/2" MPT - NOT STAINLESS. These are chrome over brass I believe. Asking $3 for the lot.
Assortment of stainless gas connector hoses as follows:
Qty 3 - 24", 1/4" ID with 3/8 female flare on both ends. Asking $10 each. Rated for low pressure!
Qty 1 - 36", 1/4" ID with 3/8 female flare on both ends. Asking $10. Rated for low pressure!
Qty 2 - 16", 1/4" ID Stainless Steel braided hose with 3/8" carbon steel gas female flares ends. These are rated for pressures up to 2000PSI! These are custom hoses I had made. Cost me $38 per hose, asking $30 per hose. Never used. Good for high pressure and rated to 1500 degrees F. Bend radius is 5".
Qty 3 - 26", 1/4" ID Stainless Steel braided hose with 3/8" carbon steel gas female flares ends. These are rated for pressures up to 2000PSI! These are custom hoses I had made. Cost me $42 per hose, asking $35 per hose. Never used. Good for high pressure and rated to 1500 degrees F. Bend radius is 5".
Thanks in advance!