Foam

[Mathomson75]

Ok so I built my keezer a while ago and had no problem. I have 2 perlick taps one on 12' of line the other on 10. The only problem I had was moisture. I decided to install a eva dry 1100 and seal up the keezer better. Now every time I make my first pint I get a solid glass of foam then after that it pours fine. What could be causing the problem is beyond me I have checked my connections and have no idea what the problem is. Any thoughts?

 

[hotwatermusic]

One possibility that you haven't eliminated, at least with what you have posted thus far, is temperature stratification. Don't think it would yield a full pint of foam but I had a similar problem which was helped by running a small fan in the keezer to help with circulation. If the beer is warming in the beer line the gas will begin to break out of solution.

 

[Mathomson75]

I have a small computer fan and the eva dry is electric with a small fan inside maby I should re direct the discharge of the eva dry away from the lines