expanding fridge

[Arbe0]

I have 2 kegs in my fridge, that is all that will fit. I just noticed that if I could cut the parts off that were holding shelves I could get one more in there. Could I do this without creating problems with my fridge.

 

[BrewInspector]

I doubt it would do any harm. They are likely just plastic forms filled with expanded insulation.

Trim them flush with the wall and cover the exposed insulation in some manner. Maybe glue a thin plastic sheet over them or paint a sealant over it.

Probably wouldn't be a real problem but I would want to seal it some how

 

[IslandLizard]

There's a thread about cutting off all those shelf ridges with an oscillating saw. Do a (Google) search. I think you also need to remove the door shelves panel.

 

[Shawn3997]

Put an angle grinder cutting blade on a drill and you can cut those off flush.

 

[ancientmariner52]

You can easily seal the exposed foam by smearing on a coating of silicone caulk. It won't be pretty, but it will prevent the foam from harboring mold or bacteria.