Oregon Electric Brewing set up.

[Bobbybob]

So I started building an three pot electric brewing set up about 2 months before my first child. Well that was almost 5 years and another Kid ago so I am going to sell the majority of it. This was a DIY set up from ebrewsupply.com. It was the last non-stainless box that they cut. It is a 50a two pid 2 element system. I would love for a local pickup but that am willing to ship with buyer paying the cost of course.

Everything is done except the therm’s are done. I have the cords for the therm probes too.

Cover fabric for the temp prob cable, and some leftover wire (I am an electrician I used some of my own).I will take $650 for the control panel. It has never been fired up so buyer will need to do testing to be sure.

Thirty gallon pot with tri-clover firings, false bottom, two valves one with a three way and a temp probe. This was going to be my brew kettle. $250 for everything pictured in the kettle.

This was to be my mash tun. A 26 gallon pot with false bottom several dip tube options tri-clover fittings. $250.

Also pictured is a 50’ 1/2” stainless HERMS coil set up to to be punched thru the lid of of a kettle. With the compression fittings I will take $75.

 

[Bobbybob]

Bump

 

[ram1169]

I am interested. I'd need to ship it though. Any idea what shipping would be on those things? 30188

*Edit Sorry I wasn't clear. I am interested in the kettles.

 

[BillyWhiteLegs]

Where are you located?

 

[Bobbybob]

Sorry I live in Portland Oregon.

 

[Bobbybob]

I am interested. I'd need to ship it though. Any idea what shipping would be on those things? 30188

*Edit Sorry I wasn't clear. I am interested in the kettles.

I will see what it cost when I get home , if I was thinking I would have weight them before.

 

[Bobbybob]

Each of them weighs ~40 pounds usps puts it at $196 and change each. That is with everything in the pictures in them.

 

[ram1169]

Thanks for checking that out. Wow. The shipping cost really add up. I am going to bow out, but good luck with the sale.

 

[Bobbybob]

Yeah I think I am going to have to find a local. The shipping is rough. Fed ex was 137 each but The website was glitching on my phone.

 

[Bobbybob]

Well after a lot of drama this is back on the market. Thems are installed. 500 for the control panel, plus shipping if needed. 200 per pot with the gear pictured, plus shipping. Just a note the shipping cost form west coast to east coast is very expensive, north south is less so not sure why.

 

[molson1993]

Shipping on the panel to 93955?

 

[Southern_Junior]

Is the coil still available?

 

[Bobbybob]

Shipping on the panel to 93955?

Looks like 60 dollars UPS ground

 

[Bobbybob]

Is the coil still available?

Yes still have the herms coil.

 

[Southern_Junior]

Yes still have the herms coil.

What would shipping be to 77008?

 

[molson1993]

Looks like 60 dollars UPS ground

Do you have more pictures? Shoot me a pm if you could, I'm trying to see the component details. I'll probably take it off your hands

 

[Bobbybob]

What would shipping be to 77008?

About 30 dollars. You would probably be better just to buy a new one from stainless brewing then you can match it to your needs for about the same price.

 

[RonBurgundy10]

Well after a lot of drama this is back on the market. Thems are installed. 500 for the control panel, plus shipping if needed. 200 per pot with the gear pictured, plus shipping. Just a note the shipping cost form west coast to east coast is very expensive, north south is less so not sure why.

What would shipping be on the panel to 49534

 

[Bobbybob]

What would shipping be on the panel to 49534

About a 100 bucks.

 

[Bobbybob]

Bump

 

[Bobbybob]

30 gallon pot with pictured gear sold, Congratulations Barlee. Still have a 26 gallon pot w/gear (200), and a 50 Kal clone panel (500). Also bump.

 

[Bobbybob]

Bump

 

[Cascadesrunner]

Hey Bobby. Interested in the panel if it is still around. Not Portland local, but Oregon local and need to make a run to Astoria to get some other gear.

 

[Bobbybob]

Panel sold! Congratulations BrewdyQuah.
Still have a 26 gallon, and a coil for sale.

 

[BrewdyQuah]

A much appreciated thanks to Bobby who was willing to work out a price for someone just starting out on their electric brewing journey.

I'm super excited to migrate from house-fire to electrocution as my biggest homebrew risk.

 

[CthulhuBrew33]

Tempted on the 26gal and coil setup. Might take me a couple weeks to put the dough together though.