Indiana EBrew Kit, keggles, shaker table, misc

[brum]

I moved into a house that doesn't have enough room to keep my envisioned setup so time to liquidate the parts I have collected so far. I am located in Indianapolis and can travel a little ways to meet buyers.

Ebrewsupply 2 PID 50A kit - $450
https://flic.kr/p/23vvEWt
https://flic.kr/p/2e3jgYQ
https://www.adafruit.com/product/1287

- mounted in large enclosure with lights/switches already mounted
- Planned for the 10" screen to be run with a Raspberry Pi with Brewtarget running
- Components are mounted on DIN rail
- labels included
- total retail for package is ~$500
- I will throw in some wire and miscellaneous supplies I have.

Bottom drain mash tun - $100 https://flic.kr/p/23vvEAP
- Triclamp fitting and elbow

HLT - $125 https://flic.kr/p/2d1VWz9
- Has thermometer
- Drain
- Sightglass

Virgin Keggle - $50
- No holes drilled
- Top cut out

Stainless fittings (from brewhardware.com)
https://flic.kr/p/2cJ75Cg
- (7) 1/2" NPT Female/female couplings - $10
- (1) 1/4" NPT Female/female couplings - $2
- (2) 2" inch radiused solder on triclamp fittings with clamps - $25 ea

Shaker table - $100 https://flic.kr/p/2cJ74mi
- can hold (4) 1L Erlernmeyer style flasks

Buckets - $20 for 4 https://flic.kr/p/RYSrVs

Misc $20 https://flic.kr/p/RYSrNJ
- Capper
- Caps
- Racking cane
- Scale
- Mash Paddle
- Funnels

Glass Carboy - $20

Maltmill Grain Mill - $125 https://flic.kr/p/RYSte9
- Mounted on stand

Willing to do some discounting on purchasing multiple things.

Thanks!

 

[mwayne112]

Sorry, turns out it was not the thing I needed, good luck!

 

[Bill Huelsman]

I'm in Lawrenceburg, interested in the control panel, Keggle and HLT

 

[brum]

Bill, I sent you a message last week. Let me know if you are still interested.

 

[Regulation]

Would you ship the shaker?

 

[Regulation]

and would it shake a single 5L?

 

[brum]

I will ship. This was a retired piece of equipment from my process dev lab at a pharma company. It should be fine. Approximate table size is 13" x 13"

 

[brum]

Grain mill, buckets, carboy, and misc supplies are gone. Keggles and control panel are still available