Anticlimaddox
Active Member
I am selling my complete electric brewery and draft equipment. I have easily over 12k in this setup but selling it as a complete set for $6k.
Brewery is assembled per Electric Brewery's instructions and ready to plug in and brew. I am not interested in piecing it out. The core list of components are below - not listed are various tools, tubing, cleaning agents, salts, etc that I will throw in for the purchaser.
Location for pickup: 22802 (Harrisonburg, VA)
Local pickup only - will not piece apart, selling as a unit
Hold with deposit? - yes
I will mark this post [SOLD] - otherwise, yes it is still available
Photos: View images here
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
30A Control Panel (purchased pre-assembled from Electric Brewery)
Control panel power cord
2x Heating elements (assembled and installed)
3x Temp probes (assembled and installed)
3x 20g Blichmann Boilermaker kettles with lids
NPT fittings
Herms Coil (installed)
Boilermaker False bottom
Assorted parts (hoses, fittings, etc)
Assorted TriClamp Fittings
TriClamp CIP fittings and pump
Stainless table
Vortex VTX600
Stainless Vent Hood
2x Chugger pump
1x Counterflow plate chiller with fittings
Hop stopper
1x SS Brewtech 14g Chronicle
2x SS Brewtech 7g brew bucket
Triclamp fittings for brewbuckets
Greenlee punches (all 3)
10x Ball Lock Corny Kegs
1, 2 and 5L flasks and 2 stir plates
Ferrari floor corker and capping attachments
4x Perlick taps (650SS)
4 way manifold
4 body secondary
5g CO2 tank (w/ taprite regulator and guard)
10g CO2 tank (w/ taprite regulator and guard)
2 tap Jockey box
3 wheel Crankenstein mill grinder
Grinder motor mounted in stainless table
Hopper extension
2x large airtight feed grain bins
2x 5gallon buckets with airtight bin lids
Upright freezer with temp control (brewpi) - iPad not included
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Feel free to message me through this forum if genuinely interested. I am not in a rush to sell—therefore, flexible on pickup dates. Must provide a deposit to hold. This setup has brought me several years of brewing enjoyment and has many more left to give. I lack the time or enthusiasm to brew that I once did and its sad to let this keep sitting idle.
If not marked [ SOLD ] in title then it is still available.
Let it brew again.
Thanks // Brian
Brewery is assembled per Electric Brewery's instructions and ready to plug in and brew. I am not interested in piecing it out. The core list of components are below - not listed are various tools, tubing, cleaning agents, salts, etc that I will throw in for the purchaser.
Location for pickup: 22802 (Harrisonburg, VA)
Local pickup only - will not piece apart, selling as a unit
Hold with deposit? - yes
I will mark this post [SOLD] - otherwise, yes it is still available
Photos: View images here
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
30A Control Panel (purchased pre-assembled from Electric Brewery)
Control panel power cord
2x Heating elements (assembled and installed)
3x Temp probes (assembled and installed)
3x 20g Blichmann Boilermaker kettles with lids
NPT fittings
Herms Coil (installed)
Boilermaker False bottom
Assorted parts (hoses, fittings, etc)
Assorted TriClamp Fittings
TriClamp CIP fittings and pump
Stainless table
Vortex VTX600
Stainless Vent Hood
2x Chugger pump
1x Counterflow plate chiller with fittings
Hop stopper
1x SS Brewtech 14g Chronicle
2x SS Brewtech 7g brew bucket
Triclamp fittings for brewbuckets
Greenlee punches (all 3)
10x Ball Lock Corny Kegs
1, 2 and 5L flasks and 2 stir plates
Ferrari floor corker and capping attachments
4x Perlick taps (650SS)
4 way manifold
4 body secondary
5g CO2 tank (w/ taprite regulator and guard)
10g CO2 tank (w/ taprite regulator and guard)
2 tap Jockey box
3 wheel Crankenstein mill grinder
Grinder motor mounted in stainless table
Hopper extension
2x large airtight feed grain bins
2x 5gallon buckets with airtight bin lids
Upright freezer with temp control (brewpi) - iPad not included
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Feel free to message me through this forum if genuinely interested. I am not in a rush to sell—therefore, flexible on pickup dates. Must provide a deposit to hold. This setup has brought me several years of brewing enjoyment and has many more left to give. I lack the time or enthusiasm to brew that I once did and its sad to let this keep sitting idle.
If not marked [ SOLD ] in title then it is still available.
Let it brew again.
Thanks // Brian
Last edited:
