slakwhere
Well-Known Member
so i needed to hop in a corny as secondary, but i didn't want the bag to clog the dip tube. I took the air in dip tube (the short one) and drilled a hole at the bottom of it. re-assemble as normal, then take a small piece of stainless steel wire (safety wire for you mechanics) and put it through the hole and the hop bag. now i can pull the bag out in a couple days (or near the end of the keg) and not worry about clogging the keg.
realistically what i'm going to do is dry hop for 5 days and then transfer through my plate filter to the "finished" keg, but it should work the same for any dry hop needs in your "finished" keg.
realistically what i'm going to do is dry hop for 5 days and then transfer through my plate filter to the "finished" keg, but it should work the same for any dry hop needs in your "finished" keg.