P Piney Member Joined May 13, 2011 Messages 24 Reaction score 0 Location Warren Grove Sep 15, 2011 #1 What drill bit size do I need for perlick faucets to go through my collar on my keezer?
S SgtB Well-Known Member Joined Jun 30, 2011 Messages 55 Reaction score 1 Location Clayton Sep 15, 2011 #2 I don't know the size, but you want a hole saw.
B BLACKHAWK007 Member Joined Aug 17, 2011 Messages 19 Reaction score 0 Location Lisle Sep 15, 2011 #3 I used a 7/8" hole saw bit to cut the holes for my shanks.
B BLACKHAWK007 Member Joined Aug 17, 2011 Messages 19 Reaction score 0 Location Lisle Sep 15, 2011 #4 Here is a photo after the holes were drilled.
jafo28 Supporting Member HBT Supporter Joined Aug 9, 2010 Messages 961 Reaction score 196 Location NJ Sep 15, 2011 #5 BLACKHAWK007 said: I used a 7/8" hole saw bit to cut the holes for my shanks. Click to expand... Used the same thing, nice snug fit.
BLACKHAWK007 said: I used a 7/8" hole saw bit to cut the holes for my shanks. Click to expand... Used the same thing, nice snug fit.