Munich Helles Dead Guy Clone (Extract & AG- see note)

[HBrew71]

Thanks zeg. As you suggested, as I don't taste any off flavors, I will just cold crash at between 40 and 45 for 7-10 days. Thanks again.

 

[HBrew71]

I kegged this about 2 weeks ago. And it is finally starting to taste like DGA. Great recipe. Another winner from Yooper.

 

[HoppyDaze]

Agree. Just follow the recipe exactly and you'll get great results. I've tried it with hop substitutions and different yeasts. Pacman is a must if you want DG, period

 

[zeg]

For a DG clone, you're probably right. But I have to say, as I posted upthread, I brewed "this" using Vienna malt, subbing out the hops, and using WLP007.... after a somewhat extended bottle conditioning, it's finally hit its prime and it is fantastic. It's not DG, but it's certainly similar (and good).

So, clone or not, I think the recipe proporitons here are a winner.

 

[HoppyDaze]

For a DG clone, you're probably right. But I have to say, as I posted upthread, I brewed "this" using Vienna malt, subbing out the hops, and using WLP007.... after a somewhat extended bottle conditioning, it's finally hit its prime and it is fantastic. It's not DG, but it's certainly similar (and good).

So, clone or not, I think the recipe proporitons here are a winner.

Well yeah. But this is a DG clone recipe and I in no way meant imply that variations won't make great beer. But people looking here are undoubtedly looking for a clone, not a cousin...

 

[jwm1485]

How long have you guys been giving this before bottling

 

[tonyscha]

This is next in line for brewing, but since I buy hops 1oz at a time, I was wondering if I used some of the Saaz as bittering hops and reduce the perle, if it would be ok? I am ok with a overall slightly lower IBU.

boil 60 min 0.500 Perle ~ pellet
boil 60 min 0.500 Saaz ~ pellet
boil 30 min 0.250 Perle ~ pellet
boil 5 min 0.250 Perle ~ pellet
boil 5 min 0.250 Saaz ~ pellet

 

[olz431]

I picked up the ingredients for this the other day, Along with a 6 pack of dead guy. I found I don't like it. So I added some cascade and centennial with a little simcoe to the boil.

 

[ACC84]

Did this last week! Just finishing up primary now.

 

[jaminman]

I put a slight spin on this to ferment on Sunday and it's still going strong! In fact it's bubbling into my airlock and out the side of a 6.5 gallon bucket... Yikes!

But it smells great so I'll clean it up and keep an eye out. This was my first time using liquid yeast with a built in starter so that's what I'm blaming haha.

 

[mike_in_ak]

Use a blowoff tube.

Wyeast doesn't really have a "starter" in it, it's really just some nutrients to determine whether it's live yeast.

But a blowoff tube will dump your extra mess into a bucket, pot, or jar.

 

[jaminman]

Thanks! Luckily it looks like it's chilled out now but that's on the shopping list for the next batch.

 

[mike_in_ak]

If you use a 2 piece airlock, you can use a tube that attaches to the inside of the airlock. So a one dollar investment. But it's hard to remove from airlock in my experience.

 

[Carros]

Tapped a keg of this this weekend that I brewed back in January. Tried it side by side with a bomber of Dead Guy and it is very close. Thanks for the great recipe Yooper.

 

[Yooper]

Tapped a keg of this this weekend that I brewed back in January. Tried it side by side with a bomber of Dead Guy and it is very close. Thanks for the great recipe Yooper.

I'm so glad it turned out so good for you!

 

[jbags5]

About to brew my 3rd batch of a version of this beer over the past 12 months. Since I've only brewed about 20 times total, it's quickly becoming my house ale

I do AG and use the exact grain bill provided in the first post. Can't find Pacman here, so use 1272 instead. Used all Perle in my first batch and it was amazing. Used Perle and Amarillo the 2nd time, and it was similarly amazing

I've now got Perle and Saaz in my inventory, so I'll probably use the exact recipe this time around (except for the 1272 for PacMan subsitution). Thanks for the recipe!

 

[Pratzie]

Can't wait to try this, Dead Guy is one of my fav craftbrews.

 

[Pratzie]

Yooper, which do u prefer, the extract or all grain?

 

[Big_Belgian]

My LHBS does not carry Pacman, so I'm curious if there is a consensus recommendation as to an alternate yeast for this beer (I know, it is highly unlikely there is a "consensus" anything when it comes to such topics.) I am brewing Sunday -- probably going to play it safe with 1056 or S-05 unless Yooper or someone else has a different recommendation. WY 1272 perhaps?

 

[HeuristicsInc]

I couldn't get Pacman either, so I used WLP001 California Ale with reasonable results on recommendation of the LHBS guy.
-bill

 

[volks_r_us]

I just finished brewing that beer. AG version.
I think I screwed up with grain selection a little. I ended up with a doppelbock color and a 1.069 OG
I used 1lbs of Caramunich III. I think I should have use type I instead for a lighter color.
I rehydrate some safale s05 in 1L DME and just pitch it at 64F, I plan on fermenting it at that temperature.
It is pretty Hoppy, My GF face was worth $1000 when she tasted the sample, just before adding the yeast.
Hopefully the Alcohol with smooth down the hopiness, or Ill have a nice IPA. IBU must be over 50 my perle was stronger than the recipe
Ended up with a mash Ph of 5.6 and a chloride/sulfate ratio of 2.04 for enhance maltiness.

I never tasted the dead man ale so I will have noting to refer to

[/URL][/IMG]

It's my 3rd AG and first amber ale. The next 30 days will feel like a lifetime.

 

[Yooper]

That's a bit darker than mine, but it still looks really good to me!

 

[ultravista]

I am a big fan of Dead Guy and Arrogant Bastard. I've got both kegged/on-tap right now.

Mixing the two is amazing, the maltiness of DG with the Chinook bite in AB.

This left me to consider brewing a Dead Bastard, the malt bill for DG with the hop schedule of AB.

 

[Yooper]

I am a big fan of Dead Guy and Arrogant Bastard. I've got both kegged/on-tap right now.

Mixing the two is amazing, the maltiness of DG with the Chinook bite in AB.

This left me to consider brewing a Dead Bastard, the malt bill for DG with the hop schedule of AB.

That sounds really good to me!

 

[doomXsaloon]

I am a big fan of Dead Guy and Arrogant Bastard. I've got both kegged/on-tap right now.

Mixing the two is amazing, the maltiness of DG with the Chinook bite in AB.

This left me to consider brewing a Dead Bastard, the malt bill for DG with the hop schedule of AB.

^^^^^^^^^^^^^^^yes, this sounds like a great idea! Truly a roguish notion!

 

[dethmutt]

Well I wanted to try this recipe , but while I was grinding my grains I kind of got carried away and before I knew it I milled the whole pound of crystal in with the others instead of just half a pound . I'm brewing the extract recipe, any suggestions on trying to balance it out?

 

[grhsgomer]

sounds like a good beer i will have to give this a try this weekend

 

[iamperplexed]

I just realized that in the last recipe (AG) I did at home, I made some changes, and I think it made it better. Here it is:View attachment 4778

Is this version still your preferred recipe?

Thanks.

 

[ultravista]

Yeah Yooper, have you done this brew lately? Any tweaks?

 

[Yooper]

I haven't made it in ages. I made it at least 10 times as written, and wouldn't change it though.