• Please visit and share your knowledge at our sister communities:
  • If you have not, please join our official Homebrewing Facebook Group!

    Homebrewing Facebook Group

Critique my Bitter recipe

Homebrew Talk

Help Support Homebrew Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

lyacovett

Well-Known Member
Joined
May 12, 2009
Messages
265
Reaction score
3
Location
Cartersville, GA
I have been interested in brewing a decent session bitter since I started brewing, but haven't done it yet. I came up with a recipe, and was looking for some feedback on it.

What do you think of this?


Recipe Specifics
----------------

Batch Size (Gal): 5.50 Wort Size (Gal): 5.50
Total Grain (Lbs): 8.13
Anticipated OG: 1.042 Plato: 10.42
Anticipated SRM: 11.0
Anticipated IBU: 39.3
Brewhouse Efficiency: 75 %
Wort Boil Time: 60 Minutes


Grain/Extract/Sugar

% Amount Name Origin Potential SRM
--------------------------------------------------------------------------
92.3 7.50 lbs. Pale Malt(2-row) Great Britain 1.038 3
1.5 0.13 lbs. Chocolate Malt Great Britain 1.034 475
6.2 0.50 lbs. Crystal 40L America 1.034 40


Hops

Amount Name Form Alpha IBU Boil Time
--------------------------------------------------------------------------
1.25 oz. Willamette Pellet 5.00 28.0 60 min.
1.00 oz. Willamette Pellet 5.00 7.5 20 min.
1.00 oz. Willamette Pellet 5.00 3.7 5 min.


Yeast
-----
Yeast S-04 SafAle English Ale
 
Looks good to me. It's about what I'm doing with my bitter as far as the grain bill goes. Check out my recipe if you're interested. It's an excellent beer.
 
While it looks good to me (I'd certainly drink it), I have a couple of issues.

First, I find the OG a bit high for a "session" beer. To me, "session" means an ABV no more than 3.5%; my session bitter doesn't exceed 1040 OG. (See recipe and thread here.) According to ProMash, your grist will reach 1045 OG at 75% efficiency.

Second, I question the use of roasted malts. 2 ounces isn't going to overwhelm the flavor, and it'll give a nice red color, but it may very well have a flavor impact on such a simple grist. I'd knock it back to one ounce, just to be sure. You can also consider adding the crushed Chocolate malt to the top of the grain bed when you start sparging; some brewers report extraction of color and little to no flavor with this method (I've never tried it, but it sounds like it's worth a shot).

I <3 Willamette. Yummy, Fuggly goodness...

Bob
 
Back
Top