MollyHatchet
Well-Known Member

Sent from my iPad using Home Brew
View attachment 193486 my first all grain, very happy with the results. The only change I did was I added .50 lb of Carapils. Makes for a nice easy drinker with just a tad more mouth fill. My two tap tower is going to be going to a four tap system in the very near future, and I can see this a being a regular on the rotation. PS: I brewed this 24 days ago, at 19 days it was good, at 20 days it was better. Now it's everything it was described to be in this thread, THANKS BM!
Sent from my iPad using Home Brew
View attachment 193486 my first all grain, very happy with the results. The only change I did was I added .50 lb of Carapils. Makes for a nice easy drinker with just a tad more mouth fill. My two tap tower is going to be going to a four tap system in the very near future, and I can see this a being a regular on the rotation. PS: I brewed this 24 days ago, at 19 days it was good, at 20 days it was better. Now it's everything it was described to be in this thread, THANKS BM!
Sent from my iPad using Home Brew
14 day fermentation, 9 days in the keg. I chilled it to serving temp (24 hrs), force carbed it for 24 hours @ 30 lbs. So what you see is 23 days grain to glass. Very happy with it. Wife says it's a great wing beer. ,y grain crush was not what it should of been, I got 68-69% efficiency, so I started to run my grains through the mill twice! and I am getting into the upper 70's, low 80's in efficiency now. I have a barley crusher, the rollers are set at .039.
PS: Beers,it's said I should have been at 5.4%, but I came out at 4.7%, still delish!!
Sent from my iPad using Home Brew
If you don't mind let me know how it tastes a few weeks from now. I am curious to see if gets any better with time while it is on the gas. I usually let my beers ferment for 3 weeks and then sit on the gas for 3 weeks but I would like to find an easy drinking beer that I can turn around in a month if needed.
Just brewed a variation of this recipe.
Grain Bill:
3 lbs 2 oz of 2 Row Malt
1 lb 1 oz of Flaked Corn
8.2 oz of Minute Rice
I did a 90 minute BIAB mash in my 20 qt brew kettle with 3.9 gallons of water. Mash temperature started at 150 degrees. When I measured it, after 40 minutes it dropped to 146 degrees so I removed the grain bag and reheated it to 150 degrees. Then I replaced the grain and continued the mash. After another 50 minutes, the mash temperature was at 148.
After removing the grain I started the boil. Pre boil gravity was 1.033
Did a 30 minute boil followed by my first hop addition:
0.25 oz Willamette
After 50 additional minutes I added:
0.36 oz of Crystal Hops and 1/4 tsp of rehydrated Irish Moss followed by flameout 10 minutes later.
Total volume into fermenter is 2.25 gallons with an OG of 1.051
Estimated ABV is 5.4% and IBUs is 18.2
Right now, its cooling down to 48 degrees for me to pitch my yeast slurry from a 1.3 L starter of WLP800 (Pilsner Lager Yeast). After pitching I will set my Chest Freezer to 52 degrees for primary fermentation. I intend to raise the temperature to 55 degrees after 5 days, and then gradually ramp it up to 65 when Krausen starts to fall for a Diacetyl Rest. I will then transfer to a secondary and Lager at 40 degrees for 2 weeks followed by another 2 weeks at 34 degrees. After that, I will pitch a 10mL starter of S04 yeast and bottle it.
Recently switched equipment, and I completely undershot my temperature and after adding a bunch of boiling water and still being under, I gave up. Hit about 147. So I'm going to have a very lightbodied version of this. I ended up doing kind of a decoction where I pulled off about a gallon of the wort after 30 minutes, raised the temperature, and added it back in. Ended up at 156 for the last 60 minutes. I suspect I'm going to have a very lightbodied version of this, but I don't know. I'm a bit worried about the other off effects from the decoction mash coming through in such a light beer. Regardless, I'm going to relax and not worry.
Good news is I hit the target OG. I pitched 5 gallons with US-05 and 5 gallons with Wyeast Kolsch.
This will also be my inaugural kegging batch. I plan to put the US-05 into a keg first, and let the kolsch age a little longer.
Recently switched equipment, and I completely undershot my temperature and after adding a bunch of boiling water and still being under, I gave up. Hit about 147. So I'm going to have a very lightbodied version of this. I ended up doing kind of a decoction where I pulled off about a gallon of the wort after 30 minutes, raised the temperature, and added it back in. Ended up at 156 for the last 60 minutes. I suspect I'm going to have a very lightbodied version of this, but I don't know. I'm a bit worried about the other off effects from the decoction mash coming through in such a light beer. Regardless, I'm going to relax and not worry.
Good news is I hit the target OG. I pitched 5 gallons with US-05 and 5 gallons with Wyeast Kolsch.
This will also be my inaugural kegging batch. I plan to put the US-05 into a keg first, and let the kolsch age a little longer.
Racked this off of strawberries two days ago throwing it in a keg tonight hydro samples were great
Sent from my iPhone using Home Brew
Am drinking on my second batch of Co3C and took some to my (new!) LHBS' first tasting event. I had a great suggestion given, to add some strawberry or blueberry to the recipe. I can see that being a really tasty brew! May give that a whirl very soon.
Sent from my iPhone using Home Brew
Funny you should say that. I'll making this for the first time at the end of may, and decided to to a 10 gallon batch, split it and do half with strawberries. I'll use the canned strawberries from Oregon Fruit, if I can find it. I can get blueberry and cherry easily, though.