M mcgeebc Well-Known Member Joined Jan 30, 2007 Messages 90 Reaction score 2 Location Cleveland, OH Sep 27, 2011 #1 I have some leftover 1/2" copper tubing after making an immersion chiller, but want to switch to counterflow. Has anyone had success with 1/2" for a counterflow chiller?
I have some leftover 1/2" copper tubing after making an immersion chiller, but want to switch to counterflow. Has anyone had success with 1/2" for a counterflow chiller?
outside92129 Supporting Member HBT Supporter Joined Apr 17, 2011 Messages 1,214 Reaction score 73 Location Carlsbad Sep 28, 2011 #2 working well for me. I have 1/2" copper coil inside 1" ID PVC.
Dan I’m not wrong. I’m left handwriting HBT Supporter Joined Oct 27, 2010 Messages 7,934 Reaction score 2,681 Location Makakilo Sep 28, 2011 #3 How many feet of tubing do you have? I used 20' of 3/8"OD and it works pretty well. Slow feed though. I should have used 1/2".
How many feet of tubing do you have? I used 20' of 3/8"OD and it works pretty well. Slow feed though. I should have used 1/2".
Flomaster Well-Known Member Joined Nov 5, 2010 Messages 2,084 Reaction score 38 Location Orange Sep 28, 2011 #4 I wish I would have gone with 1/2" copper instead of 3/8" there is a HUGE difference in the flow. -=Jason=-
I wish I would have gone with 1/2" copper instead of 3/8" there is a HUGE difference in the flow. -=Jason=-
P-J Supporting Member HBT Supporter Joined Mar 7, 2010 Messages 3,336 Reaction score 296 Location Charlotte, NC Sep 28, 2011 #5 Yes. I fabricated a CFC from 1/2" OD copper. It's inside 3/4" copper. Works very well for me. There are absolutely no catch points in the wort path. No fitting threads inside. The in/out fittings are flare fittings.
Yes. I fabricated a CFC from 1/2" OD copper. It's inside 3/4" copper. Works very well for me. There are absolutely no catch points in the wort path. No fitting threads inside. The in/out fittings are flare fittings.