converting a singel tap to a dule tap kegerator

[ThePip]

Hello all new to forum, My question is that I have a Haier HBF05EBSS Stainless Steel Draft Beer Dispenser it is a singel tap kegerator and i was wondering if i could convert it to a dule tap kegerator. I beleave i have more then enough room in the frigerator to hold to 5 gal kegs, do i need to co2 bottles or i larger one. looking for suggestions on if this will work or not. cheers

 

[GilaMinumBeer]

Assuming you have a 5lb bottle it will work for more than 1 keg but at less mileage (obviously). And yes, you can add a faucet to a tower if you have the tools and take your time. the hardest part I think will be drilling the hole in the tower.

Good luck.

 

[RC0032]

This can be made into a 3 tap from what I read. You may need 2 one handle kegs.

Just buy something like this ->

 

[ThePip]

I think i was not totaly clear with the question. I think i was discribing it wrong. the kegerator i have has a single tower with on tap. I want to take the whole tower off and replace it with a dule tower.

 

[Weizenheimer]

Sure I did that with mine. Just purchase a dual tap tower. You can either split the Co2 lines for both kegs or purchase another regulator so you can serve at 2 different pressures.

 

[ThePip]

Cool that is what i thought, I have a 5ib co2 tank and i think it should work just fine on 2 5 gal kegs

 

[TheCHICompany]

Another option is a Tower Extension kit. No drilling needed.

Tower Extension Kits Tower Extension Kits [] - $48.75 : CHI Company ball lock kegs for sale, Home brewing and vending, beer kegs, Pepsi vending machines, flavor strips and vending labels

 

[Vovo]

Are tower extension kits made for 2 1/2" towers also. On the net I have only seen 3". I can get two additional tubes into my tower, but not positive how the elbow shanks would fit. By the time I buy new shanks and faucets it may be better just to buy a new 3 faucet tower and sell the old one.

 

[noremorse1]

Cool that is what i thought, I have a 5ib co2 tank and i think it should work just fine on 2 5 gal kegs

http://www.midwestsupplies.com/products/ProdByID.aspx?ProdID=4192

 

[tiko]

i know you wanted to replace the tower but check this out.
Shank, Tower Shank Assembly

 

[mkultra69]

Take a look at this thread. https://www.homebrewtalk.com/967487-post5.html Way cheaper than buying a whole new tower.

 

[Kegcowboy]

Another option is a Tower Extension kit. No drilling needed.

Tower Extension Kits Tower Extension Kits [] - $48.75 : CHI Company ball lock kegs for sale, Home brewing and vending, beer kegs, Pepsi vending machines, flavor strips and vending labels

Yeah these are great we have this for $38.Convert single to double tower.