jeremy0711
Member
I have Blichmann Gen 1 pots each setup on its own controller. One 20 gallon and two ten gallons. I also have two Steam Slayers wide body kits to go with this uninstalled. All the pots are set up on 1/2" camlocks. I have two RIMS heating units. One is Blichmann and the other is a new-in-box SS Brewtech. A little more work and a few more bucks then you could convert to a HERMs setup and sell the RIMs setup. I have two SS Brewtech chronical fermenters setup for heating and cooling with tri-clamps and butterfly valves. They're basically Brewmasters edition now. I have the 1/3 hp SS Brewtech glycol chiller. I have a good used under counter type kegerator to go with this setup. You will be able to go from grain to glass. My equipment is clean and not worn out or beat up. Most of this stuff hasn't been used but less than 10 times. I am selling everything. I haven't touched it in two years. I put everything in a corner to remodel the basement and started upgrading some of the equipment. The only thing I wanted to change was to switch to a counterflow chiller instead of a plate chiller.
Look at my list. I am looking for a single purchase. I have a lot into this stuff. There is probably some things that I am missing in this list but you get it all. I am looking for $4,500. PM me your number and I can send you pics if you are interested.
Please, do not even think that I will ship this. I am in Evansville, IN. 47715. That is southwestern Indiana. 1.5 hours from Louisville, KY. and 2.5 hours from Nashville, TN. and 2.5 hours from St. Louis, MO. and 2.5 hours from Indianapolis, IN.
I would consider trades for a large 20-24 ft enclosed car trailer, 69-70 Mustang parts or cars, 68-70 AMX cars or parts, or maybe even Snap-On tools or the such.
Look at my list. I am looking for a single purchase. I have a lot into this stuff. There is probably some things that I am missing in this list but you get it all. I am looking for $4,500. PM me your number and I can send you pics if you are interested.
Please, do not even think that I will ship this. I am in Evansville, IN. 47715. That is southwestern Indiana. 1.5 hours from Louisville, KY. and 2.5 hours from Nashville, TN. and 2.5 hours from St. Louis, MO. and 2.5 hours from Indianapolis, IN.
I would consider trades for a large 20-24 ft enclosed car trailer, 69-70 Mustang parts or cars, 68-70 AMX cars or parts, or maybe even Snap-On tools or the such.
5-10 Gallon Beer Equipment |
| Blichmann Gen 1 20G Pot/240v Boil Coil |
| Blichmann Gen 1 10G Pot/240v Boil Coil |
| Blichmann Gen 1 10G Mash Pot/Autosparge |
| Blichmann False Bottom 10G |
| Blichmann RIMS 240v Hop Rocket |
| SS Brewtech 240v RIMS Hopper |
| Blichmann 240v Gen 1 Controller- NIB |
| Blichmann 240v Gen 1 Controller-NIB |
| Blichmann 240v Gen 1 Controller-Used |
| Blichmann Riptide Pump 120v |
| Blichmann Riptide Pump 120v |
| Heat/Stir Plate-Industrial Grade/2000 ml Flask |
| Kegco 3 Roller Grain Mill |
| 7G SS brewtech Chronical/H&C |
| 7G SS brewtech Chronical/H&C |
| SS brewtech Glycol Chiller 1/3 hp |
| Loose Hardware |
| 3 Sanke 5G kegs |
| SS Brewtech Keg Washer-Corny Style |
| Hanna Refractometer 96811/Hardcase |
| Blichmann Quickcarb Carbonator |
| kegerator/20lb tank- Good Used |
| Spare 20lb tank-Full CO2 |
| 20lb O2 Tank with Oxygenator Kit |
| Steam Slayer 1.5" Wide Body Kit-NIB |
| Steam Slayer 1.5" Wide Body Kit-NIB |
| Brew Hardware Plate Chiller 40 |
| Gen 1 Tilt |
| Gen 2 Tilt |
| Gen 2 Tilt |
| Gen 2 Tilt |
| Misc Silicone hose |
Last edited:
