CO2 regulator - Hi Pressure faulty - tare weight = 7.71#, tanks weighs 10.8#, Hi Pressure reads 0?

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Gadjobrinus

Supporting Member
HBT Supporter
Joined
Aug 24, 2017
Messages
7,334
Reaction score
7,678
Location
USA
This happened overnight a week or so ago. The hi pressure read as normal, on a corny; next morning I happened to glance and the hi pressure gauge was at 0, yet the low pressure readout was still reading at setpoint (it is a tripel, cold crashed, at 14 psi). Puzzled, I pulled relief valves on both the corny and the regulator, and plenty of CO2 under pressure. I just weighed the tank and it's at 10# 10 oz. The hi pressure gauge is broken, right?
 
Almost hate to ask, but you had the regulator/gauges off the tank when you weighed it and got the 10#?
 

Latest posts

Back
Top