So i have a leak in my dual primary CO2 regulator and i am having trouble diagnosing where the leak is. I tried the whole soapy water trick but no bubbles were seen.
I turned on the gas and set both regulators to 20 psi. I have the shutoff valves to each gas line closed. I then shut off the gas. After 24 hours the 2nd regulator (furthest from the tank) still reads 20psi. The first regulator (closet to the tank) now reads 18psi. After 36 hours the 2nd still reads 20 but the 1st reads 16.
So it looks like have a slow leak. Can anyone point me in the right direction where this leak is?
I turned on the gas and set both regulators to 20 psi. I have the shutoff valves to each gas line closed. I then shut off the gas. After 24 hours the 2nd regulator (furthest from the tank) still reads 20psi. The first regulator (closet to the tank) now reads 18psi. After 36 hours the 2nd still reads 20 but the 1st reads 16.
So it looks like have a slow leak. Can anyone point me in the right direction where this leak is?