i use corona bottles theyre easy to come by. ***** to get the paint off though
1: Rinse / clean the Corona bottles
2: Fill corona bottles with tap water, then cap the bottles closed. This is to prevent CLR from getting inside the bottle.
3: In a 5 gallon plastic bucket, pour one 28 ounce bottle of CLR.
4: Place corona bottles into 5 gallon plastic bucket, caps up.
5: Add water to plastic bucket until about 1 inch above the label.
6: Let bottles soak for 48 hours.
7: Remove a bottle from the bucket. Use a metal pot scrubber or steel wool and scrub the paint off the bottle. Rinse bottle, and resoak if necessary.
It is a long, slow, tedious process, but it can be done. I have 2 cases of bottles done like this.
Also be aware that Corona bottle necks are very weak, and only a bench capper should be used. Wing cappers will crack / crush the bottle neck.
Enter your email address to join: