cleaning sankey keg tap and hoses

[Trialsguy]

I picked up 8 used sankey taps and on average 8' each tap of beer line and co2 lines that are extremely dirty and I am wondering if it would be worth it to try and clean the beer lines for reuse. I plan on making a keezer with mutiple taps that will travel out the top then through the back wall into the next room for taps

Thanks
Bob

 

[FoCobrewguy]

Dirty with dirt or mold growing inside. If it is mold I would throw it away not worth the risk. If they are just dirty soak it bkf or some other line cleaner and it will be fine. I would definitely take apart the sanke couplers and soak all the parts as well.

 

[Trialsguy]

thanks for the info, I think that I will probably just use one or 2 of the sankey and give the others to brew buddies. I have korney kegs that I am using now but the taps are inside the fridge. I was just eye balling all the hose to see If I could save a couple bucks. I will look for mold in the beer lines for sure.
Thanks

 

[Trialsguy]

thanks for the info, I think that I will probably just use one or 2 of the sankey and give the others to brew buddies. I have korney kegs that I am using now but the taps are inside the fridge. I was just eye balling all the hose to see If I could save a couple bucks. I will look for mold in the beer lines for sure.
Thanks

 

[JONNYROTTEN]

Ditch the lines,soak the taps