Cheap Copper at Home Depot

[Aceandover]

Got mine in the Norwell Mass HD and there is 1 left as of an hour ago

 

[223nbecker45]

I got 1/2 50' for 22 $ in Sacramento today. The guy told me they are changing to supplier so they discount there remaining supply

 

[stompbox]

82 bucks here!

 

[NTXBrauer]

Thanks a lot guys...I go to HD looking for this great deal on copper tubing, and ended up with a new fridge and dishwasher that SWMBO could not live without.

Seriously, if you are remodeling your kitchen or looking to upgrade, HD kicked off an unreal sale on appliances today. We saved $1,100 on the fridge we have wanted for some time, and $250 on the dishwasher. It does make me happy saving money on something needed.

 

[cyberbackpacker]

Thanks for the heads up... They were out of 5/8", but I got 50' of 1/2" for $15.93 including tax!

 

[Aceandover]

Thanks a lot guys...I go to HD looking for this great deal on copper tubing, and ended up with a new fridge and dishwasher that SWMBO could not live without.

Seriously, if you are remodeling your kitchen or looking to upgrade, HD kicked off an unreal sale on appliances today. We saved $1,100 on the fridge we have wanted for some time, and $250 on the dishwasher. It does make me happy saving money on something needed.

i did see a freezer that could be converted into a keezer for 150, not sure if that was a good price or if u could fit 4 cornys in it but i may swing back and take a look.

 

[jcoxen]

Olean, NY has 2 sections of 1/2" left for $27/ea. They did have 3 but...

 

[Epimetheus]

Thank you!

Scored the last 2 spools in Hadley, MA. Gonna take one to the brew club meeting tomorrow and share the luck.

BTW, 3/8" copper sweat fittings are perfect for the 1/2" OD if you do not want to bend tubing.

 

[sologman]

Thanks HBT'ers!

Grabbed a 50' roll of 1/2"od tubing for $21 in North Bay, CA!

Yellow Tag said it was $50, down from $75, but it was only $21 at checkout!!!

Wooooohooooo!!

 

[FunCat1828]

Thanks, had to head to 3 stores but scored 60' of the type L 1/2 ID and the 50' of the refrigerant coil

 

[JayUnt]

Had the 50' of 5/8 in Jersey. I was hoping for 1/2 or 3/8 to make a bigger chiller now that I upgraded to 10 gallon. Is 5/8 too big for an immersion chiller? I am also working on my keezer so I could use it to run the beer lined through when I make my tower. What else could I use 5/8 for?

 

[Esmitee]

Had the 50' of 5/8 in Jersey. I was hoping for 1/2 or 3/8 to make a bigger chiller now that I upgraded to 10 gallon. Is 5/8 too big for an immersion chiller? I am also working on my keezer so I could use it to run the beer lined through when I make my tower. What else could I use 5/8 for?

What part of Jersey???

 

[JayUnt]

West long branch. They was one more, after I got mine, but it wasn't in a box.

 

[Psycotte]

Grabbed seven 60' 1/2 ID tonite.

 

[steelcurtain]

Picked up a 50' of 1/2" for $20 at my local HD today, so thank you OP. Also, they had a couple 50' 5/8" OD coils for $27 and multiple 60' 1/2 OD type L for 38 as well when I left. Should still be there if anyone is looking in this area. Cheers!

 

[stompbox]

I looked all over the harrisburg area. The only one i found was 3/4"x60' for $40. Too big for my needs.

 

[Ted75]

Picked up a 1/2 50' in Norwood MA for $20 this morning. They had at least one more of the 1/2 and at least one 5/8ths left. It was on a shelf above the rest about 8ft up.

 

[Aceandover]

Do u think the 1/2 inch is to thick to make a CFC out of it?

 

[binarycataclysm]

Holy crap! Thanks guys for posting this. I got 60' of 5/8 and 60' of1/2 for $74!

 

[goldentaters]

I saw this, left the desk, and ran to HD. They had (2) rolls of the 50' 5/8" OD and (2) rolls of the 60' 1/2" ID left. I am going to check my local HD on the way home to see if the prices are lower there. I feel like a kid on Christmas morning!

which home depot topher

 

[stpug]

Thanks for the heads up on this FLBrew. I was able to snag a 50' 1/2" coil for $20 also.

Cheers

 

[coolharry]

No fire sale in Green Bay yet.

 

[bfgcdub]

I wasn't really planning on making a chiller anytime soon but I couldn't pass up this deal. Picked up 1/2" x 50' for $15.03. It was the last if that size but there were several other sizes still available. Store in North Olmsted, OH.

Now to research what other parts I need! I love homebrew projects

 

[FLBrew]

Thanks for the heads up on this FLBrew. I was able to snag a 50' 1/2" coil for $20 also. Cheers

No problem...glad I could contribute in some way to HBT. I'm stoked so many people are able to save some money...more to spend on other Homebrew parts and supplies.

 

[BigFloppy]

No firesale NW Atlanta either yet

 

[johns]

some guys have all the luck......No such deals around here

 

[jperry]

NO SALE in San Diego, CA. What a bummer. I should have known not to get my hopes up. I always get shafted.

 

[FLBrew]

NO SALE in San Diego, CA. What a bummer. I should have known not to get my hopes up. I always get shafted.

You're 3 hours behind...check back tomorrow 😉

 

[Topher79]

which home depot topher

It was the Home Depot in Peachtree City. I'm headed back by Monday on my way in to buy another if any are left.

Newnan was a no-go.

 

[Justdrumin]

No firesale NW Atlanta either yet

It was the Home Depot in Peachtree City. I'm headed back by Monday on my way in to buy another if any are left.

Newnan was a no-go.

I found a roll up in Gainesville. I'm gonna check at a HD in Gwinnett tomorrow to see if they have any.