phoenixs4r
Well-Known Member
- Joined
- Jun 16, 2011
- Messages
- 1,566
- Reaction score
- 93
I'm trying to reduce my brew day length, the easiest way I can see at this point is to run HOT water to my brewery, which currently consists of only cold water from a hose. This will allow me to start with hot water for the strike/sparge water, as well as let me clean much better since I'll have hot water.
I'm curious if I use the rubber hoses like the DIY CFC builds use, will the water traveling through it and coming out at near 140* still be potable? I know nothing about hot water and whatever the hose is made out of. The hose would need to be about 7 feet long and I'd frankly rather not run copper as it's a rental and copper is expensive.
Thanks for any suggestions.
I'm curious if I use the rubber hoses like the DIY CFC builds use, will the water traveling through it and coming out at near 140* still be potable? I know nothing about hot water and whatever the hose is made out of. The hose would need to be about 7 feet long and I'd frankly rather not run copper as it's a rental and copper is expensive.
Thanks for any suggestions.